Wiki / Blocks

Block catalogue

All 133 blocks that ship with Mutant Tools, with the options each one exposes on its config node and the exact command the builder calls.

133 entries

Presets 000_Presets#

Whole-character templates. One click drops a full block stack in the outliner, ready for guide placement.

ToonTemplateWill import the Toon Template 001_ToonTemplate

Will import the Toon Template

Default block name ToonTemplate · icon Sausage.png · exec_toonTemplate_v001.py

commands
exec_toonTemplate_v001.create_toonTemplate_block()
exec_toonTemplate_v001.build_toonTemplate_block()
ToonFaceTemplateWill import the toon Face Template 002_ToonFaceTemplate

Will import the toon Face Template

Default block name toonTemplate · icon SausageFace.png · exec_toonFaceTemplate_v001.py

commands
exec_toonFaceTemplate_v001.create_toonFaceTemplate_block()
exec_toonFaceTemplate_v001.build_toonFaceTemplate_block()
HumanBodyTemplateWill import the human Body Template 003_HumanBodyTemplate

Will import the human Body Template

Default block name humanBodyTemplate · icon Hero.png · exec_humanBodyTemplate_v001.py

commands
exec_humanBodyTemplate_v001.create_humanBodyTemplate_block()
exec_humanBodyTemplate_v001.build_humanBodyTemplate_block()
HumanGameTemplateWill import the Human Template to work on Game Engines003_HumanGameTemplate

Will import the Human Template to work on Game Engines

Default block name humanBodyTemplate · icon HumanGame.png · exec_humanGameTemplate_v001.py

commands
exec_humanGameTemplate_v001.create_humanGameTemplate_block()
exec_humanGameTemplate_v001.build_humanGameTemplate_block()
HumanSimpleBodyTemplateWill import the Human Body Simple Template 003_HumanSimpleBodyTemplate

Will import the Human Body Simple Template

Default block name humanBodyTemplate · icon StickFigure.png · exec_humanSimpleBodyTemplate_v001.py

commands
exec_humanSimpleBodyTemplate_v001.create_humanSimpleBodyTemplate_block()
exec_humanSimpleBodyTemplate_v001.build_humanSimpleBodyTemplate_block()
HumanUnrealGameTemplateWill import the Human Unreal Game Template to work on Game Engines003_HumanUnrealGameTemplate

Will import the Human Unreal Game Template to work on Game Engines

Default block name humanUnrealGameTemplate · icon HumanGameUnreal.png · exec_humanUnrealGameTemplate_v001.py

commands
exec_humanUnrealGameTemplate_v001.create_humanUnrealGameTemplate_block()
exec_humanUnrealGameTemplate_v001.build_humanUnrealGameTemplate_block()
HumanFaceTemplateWill import the human Body Template 004_HumanFaceTemplate

Will import the human Body Template

Default block name humanBodyTemplate · icon Face.png · exec_humanFaceTemplate_v001.py

commands
exec_humanFaceTemplate_v001.create_humanFaceTemplate_block()
exec_humanFaceTemplate_v001.build_humanFaceTemplate_block()
HumanSimpleFaceTemplateWill import the Human Face Simple Template 004_HumanSimpleFaceTemplate

Will import the Human Face Simple Template

Default block name humanBodyTemplate · icon StickFigureFace.png · exec_humanSimpleFaceTemplate_v001.py

commands
exec_humanSimpleFaceTemplate_v001.create_humanSimpleFaceTemplate_block()
exec_humanSimpleFaceTemplate_v001.build_humanSimpleFaceTemplate_block()
minotaurTemplateWill import the Minotaur Template 005_minotaurTemplate

Will import the Minotaur Template

Default block name SausageTemplate · icon Minotaur.png · exec_minotaurTemplate_v001.py

commands
exec_minotaurTemplate_v001.create_minotaurTemplate_block()
exec_minotaurTemplate_v001.build_minotaurTemplate_block()
QuadTemplateCreate Quad Template006_QuadTemplate

Create Quad Template

Default block name PropTemplate · icon Quad.png · exec_quad_template_v001.py

commands
exec_quad_template_v001.create_quad_template_block()
exec_quad_template_v001.build_quad_template_block()
CarTemplateWill Import the Car template007_CarTemplate

Will Import the Car template

Default block name CarTemplate · icon Car.png · exec_carTemplate_v001.py

commands
exec_carTemplate_v001.create_cartemplate_block()
exec_carTemplate_v001.build_cartemplate_block()
SeagullTemplateWill Import the seagull template008_SeagullTemplate

Will Import the seagull template

Default block name seagullTemplate · icon Seagull.png · exec_seagullTemplate_v001.py

commands
exec_seagullTemplate_v001.create_seagulltemplate_block()
exec_seagullTemplate_v001.build_seagulltemplate_block()
PropTemplateCreate props guides009_PropTemplate

Create props guides

Default block name PropTemplate · icon PropTemplate.png · exec_prop_template_v001.py

commands
exec_prop_template_v001.create_prop_template_block()
exec_prop_template_v001.build_prop_template_block()
HeroPropTemplateCreate hero props guides010_HeroPropTemplate

Create hero props guides

Default block name PropTemplate · icon HeroPropTemplate.png · exec_heroprop_template_v001.py

commands
exec_heroprop_template_v001.create_prop_template_block()
exec_heroprop_template_v001.build_prop_template_block()
ChamaleonTemplateWill Import the chamaleon template011_ChamaleonTemplate

Will Import the chamaleon template

Default block name chamaleonTemplate · icon Chamaleon.png · exec_chamaleonTemplate_v001.py

commands
exec_chamaleonTemplate_v001.create_chamaleontemplate_block()
exec_chamaleonTemplate_v001.build_chamaleontemplate_block()
TortoiseTemplateWill Import the tortoise template012_TortoiseTemplate

Will Import the tortoise template

Default block name tortoiseTemplate · icon Tortoise.png · exec_tortoiseTemplate_v001.py

commands
exec_tortoiseTemplate_v001.create_tortoisetemplate_block()
exec_tortoiseTemplate_v001.build_tortoisetemplate_block()
PigTemplateWill Import the pig template013_PigTemplate

Will Import the pig template

Default block name pigTemplate · icon Pig.png · exec_pigTemplate_v001.py

commands
exec_pigTemplate_v001.create_pigtemplate_block()
exec_pigTemplate_v001.build_pigtemplate_block()
SlothTemplateWill Import the sloth template013_SlothTemplate

Will Import the sloth template

Default block name slothTemplate · icon Sloth.png · exec_slothTemplate_v001.py

commands
exec_slothTemplate_v001.create_slothtemplate_block()
exec_slothTemplate_v001.build_slothtemplate_block()
BirdTemplateWill Import the bird template014_BirdTemplate

Will Import the bird template

Default block name birdTemplate · icon Bird.png · exec_birdTemplate_v001.py

commands
exec_birdTemplate_v001.create_birdtemplate_block()
exec_birdTemplate_v001.build_birdtemplate_block()

Studio fixes 001_Studio#

Post-build fixes and conventions a studio wants applied to every asset.

Human FixesFixes for Human Template02_Human_Fixes

Fixes for Human Template

Default block name Human_Fixes · icon letter-a.png · exec_human_fixes_v001.py

commands
exec_human_fixes_v001.create_human_fixes_block()
exec_human_fixes_v001.build_human_fixes_block()

Artist help text

Help
Overview:
  Fixes for Human Template.

How To Use:
  usually you can build directly with defaults, then adjust if needed.
Toon FixesFixes for Toon Chars03_Toon_Fixes

Fixes for Toon Chars

Default block name Toon_Fixes · icon letter-b.png · exec_toon_fixes_v001.py

commands
exec_toon_fixes_v001.create_toon_fixes_block()
exec_toon_fixes_v001.build_toon_fixes_block()

Artist help text

Help
Overview:
  Fixes for Toon Chars.

How To Use:
  usually you can build directly with defaults, then adjust if needed.
Custom Biped OrientsCustom biped controller orient fixes04_Custom_Biped_Orients

Custom biped controller orient fixes

Default block name Custom_Biped_Orients · icon Custom_Biped_Orients.png · exec_custom_biped_orients_v001.py

commands
exec_custom_biped_orients_v001.create_custom_biped_orients_block()
exec_custom_biped_orients_v001.build_custom_biped_orients_block()

Config attributes

AttributeTypeDefault / options
FixArmsboolTrue
FixClaviclesboolTrue
FixFingersboolTrue
FixLegsboolTrue
FixMiscboolTrue
FixPelvisboolTrue
FixToesboolTrue

Artist help text

Help
Overview:
  Custom biped controller orient fixes.

How To Use:
  fill the key fields below before build.

Fields:
- FixArms: turn this ON/OFF depending on whether you want that feature.
- FixClavicles: turn this ON/OFF depending on whether you want that feature.
- FixPelvis: turn this ON/OFF depending on whether you want that feature.
- FixLegs: turn this ON/OFF depending on whether you want that feature.
- FixToes: turn this ON/OFF depending on whether you want that feature.
- FixFingers: turn this ON/OFF depending on whether you want that feature.
- FixMisc: turn this ON/OFF depending on whether you want that feature.

Tips:
- if a field says left/right or mirror, use it to generate the opposite side quickly.
Custom Biped Rotate OrdersCustom biped controller rotate order setup05_Custom_Biped_Rotate_Orders

Custom biped controller rotate order setup

Default block name Custom_Biped_Rotate_Orders · icon Custom_Biped_Rotate_Orders.png · exec_custom_biped_rotate_orders_v001.py

commands
exec_custom_biped_rotate_orders_v001.create_custom_biped_rotate_orders_block()
exec_custom_biped_rotate_orders_v001.build_custom_biped_rotate_orders_block()

Artist help text

Help
Overview:
  Applies biped rotate orders to existing controllers.

How To Use:
  Build this block after your rig ctrls exist.

Behavior:
- No per-part toggles.
- Applies configured rotate order where controller exists.
- Auto-applies to R_ when L_ controller is listed.
Orient OffsetApplies a matrix orient offset setup to a list of custom controls.06_Orient_Offset

Applies a matrix orient offset setup to a list of custom controls.

Default block name OrientOffset · icon OrientOffset.png · exec_orient_offset_v001.py

commands
exec_orient_offset_v001.create_orient_offset_block()
exec_orient_offset_v001.build_orient_offset_block()

Config attributes

AttributeTypeDefault / options
AutoParentChildrenboolTrue
HideOrientAttrsboolFalse
LockOrientAttrsboolFalse
RemapScaleConnectionsboolTrue
SetControlsListstringempty

Artist help text

Help
Overview:
  Applies the matrix orient offset setup to a custom list of controls.

How To Use:
  Select the controls in the scene and click 'Add Selected' below. Then click build.

Fields:
- SetControlsList: List of controls to process.
- AutoParentChildren: If true, existing children of the controls will be reparented under the new _Driven groups automatically.
- RemapScaleConnections: If true, detects direct scale connections going out of the control (e.g. multiplyDivide nodes from ScaleTweakCtrls) and remaps them through the orient rotation so scale axes match the new visual orientation.
- HideOrientAttrs: If true, the proxy orient attributes on the control will be hidden on build.
- LockOrientAttrs: If true, the proxy orient attributes on the control will be locked on build.
Scale IsolateIsolates scale for selected controls by driving a sibling node via matrix and reparentin07_Scale_Isolate

Isolates scale for selected controls by driving a sibling node via matrix and reparenting children.

Default block name ScaleIsolate · icon ScaleIsolate.png · exec_scale_isolate_v001.py

commands
exec_scale_isolate_v001.create_scale_isolate_block()
exec_scale_isolate_v001.build_scale_isolate_block()

Config attributes

AttributeTypeDefault / options
AutoParentChildrenboolTrue
SetControlsListstringempty

Artist help text

Help
Overview:
  Prevents the scale of specified controls from affecting their children.

How To Use:
  Select the controls in the scene and click 'Add Selected' below. Then click build.

Fields:
- SetControlsList: List of controls to process.
- AutoParentChildren: If true, existing children of the controls will be reparented under the new _ScaleIsolated groups automatically.
World OrientIsolates rotation for selected controls by driving a sibling node via inverse matrix, lo08_World_Orient

Isolates rotation for selected controls by driving a sibling node via inverse matrix, locking their orientation to world space.

Default block name WorldOrient · icon WorldOrient.png · exec_world_orient_v001.py

commands
exec_world_orient_v001.create_world_orient_block()
exec_world_orient_v001.build_world_orient_block()

Config attributes

AttributeTypeDefault / options
SetControlsListstringempty

Artist help text

Help
Overview:
  Forces the selected controls to always orient to the world (Z forward, Y up, X right), completely ignoring their parent's rotation.

How To Use:
  Select the controls in the scene and click 'Add Selected' below. Then click build.

Fields:
- SetControlsList: List of controls to process.
MirrorNodeEachSideFinds Mirror_Grp nodes on one side and creates matching mirror groups on the opposite si09_MirrorNodeEachSide

Finds Mirror_Grp nodes on one side and creates matching mirror groups on the opposite side

Default block name MirrorNodeEachSide · icon MirrorNodeEachSide.png · exec_mirror_node_each_side_v001.py

commands
exec_mirror_node_each_side_v001.create_mirror_node_each_side_block()
exec_mirror_node_each_side_v001.build_mirror_node_each_side_block()

Config attributes

AttributeTypeDefault / options
RunAfterBuildboolFalse

Artist help text

Help
Overview:
  Finds all nodes ending with Mirror_Grp and creates matching mirror groups on the opposite side.

How It Works:
  1. Searches the scene for any node ending with Mirror_Grp (e.g. R_Antenna_A_Ctrl_Offset_GrpMirror_Grp).
  2. Strips the Mirror_Grp suffix to get the base name (R_Antenna_A_Ctrl_Offset_Grp).
  3. Swaps the R_ prefix to L_ (or vice versa) to find the opposite-side node.
  4. Creates a new group (L_Antenna_A_Ctrl_Offset_GrpMirror_Grp) at the origin.
  5. Inserts it above the opposite-side node so it becomes a child of the new group.

Fields:
- RunAfterBuild: Check True to defer execution until after the full build finishes (recommended if the Mirror_Grp nodes are generated by later blocks).

Tips:
- Build this block after all mirrored rig components are in place.
- The new mirror groups are created with identity transforms (at origin).
HideHides the specified nodes by setting their visibility to 0.10_Hide

Hides the specified nodes by setting their visibility to 0.

Default block name Hide · icon Hide.png · exec_hide_v001.py

commands
exec_hide_v001.create_hide_block()
exec_hide_v001.build_hide_block()

Config attributes

AttributeTypeDefault / options
SetNodeListstringempty

Artist help text

Help
Overview:
  Hides specified nodes by setting their visibility to 0.

How To Use:
  Select the nodes in the scene and click 'Add Selected' below. Then click build.

Fields:
- SetNodeList: List of nodes to hide.
ToonEyeImports a toon eye rig from an external file, positions it at a locator guide, and optio11_ToonEye

Imports a toon eye rig from an external file, positions it at a locator guide, and optionally mirrors to the other side with L_/R_ prefixes.

Default block name ToonEye · icon ToonEye.png · exec_tooneye_v001.py

commands
exec_tooneye_v001.create_tooneye_block()
exec_tooneye_v001.build_tooneye_block()

Config attributes

AttributeTypeDefault / options
EyeFilestringS:/shows/SN_FrogFight/assets/prop/eye/WIP/eyerig.ma
MirrorenumTrue · False
SetCtrlParent_HierarchystringRig_Ctrl_Grp

Artist help text

Help
Overview:
  Imports a toon eye rig from an external Maya file and positions it at the locator guide.

How To Use:
  1. Create the block and position the locator where you want the eye.
  2. Set Mirror to True if you want both L_ and R_ eyes.
  3. Click Build.

Fields:
- SetCtrlParent: Parent destination for the eye group in the rig hierarchy.
- Mirror: False builds a single eye. True builds both L_ and R_ sides (R_ is mirrored in X).
- EyeFile: Path to the Maya file containing the eye rig to import.
SetDefaultsCaptures selected channel box attributes and their values, then restores them on build.12_SetDefaults

Captures selected channel box attributes and their values, then restores them on build.

Default block name SetDefaults · icon SetDefaults.png · exec_set_defaults_v001.py

commands
exec_set_defaults_v001.create_set_defaults_block()
exec_set_defaults_v001.build_set_defaults_block()

Config attributes

AttributeTypeDefault / options
RunAfterBuildboolFalse
SetDefaultsListstringempty

Artist help text

Help
Overview:
  Captures selected channel box attributes and their current values, storing them for rebuild.

How To Use:
  1. Create the block (no selection needed).
  2. Select objects in the viewport and highlight attributes in the Channel Box.
  3. Click Add to store those attribute values.
  4. Select entries and click Remove to delete them.
  5. On Build, those stored values will be set back on the controls.

Fields:
- RunAfterBuild: Check True to defer execution until after the full build finishes (recommended if attributes are built by later blocks).
- SetDefaultsList: List of node.attr = value entries.

Tips:
- Each entry is stored as node.attr = value.
- Supports any numeric attribute (float, int, bool, enum).
- You can add from multiple objects across multiple Add actions.
AnimCtrlRenameRenames animation controls and all their related nodes (shapes, constraints, offset grou13_AnimCtrlRename

Renames animation controls and all their related nodes (shapes, constraints, offset groups, etc.) based on a search-and-replace list.

Default block name AnimCtrlRename · icon Rename.png · exec_anim_ctrl_rename_v001.py

commands
exec_anim_ctrl_rename_v001.create_animctrlrename_block()
exec_anim_ctrl_rename_v001.build_animctrlrename_block()

Config attributes

AttributeTypeDefault / options
RenameListstringempty
RevertboolFalse
RunAfterBuildboolFalse
RunBeforeBuildboolFalse

Artist help text

Help
Overview:
  Renames animation controls and all their related nodes (shapes, constraints, offset groups, etc.) based on a search-and-replace list.

How To Use:
  1. Create the block.
  2. Paste a two-column spreadsheet (old_name and new_name) or select controls and click Add Selected.
  3. Double-click any entry in the list to edit it manually if needed.
  4. When you click Build, all controls and their related constraints/shapes will be renamed safely.

Fields:
- RunBeforeBuild: Check True to run renaming before the main build begins.
- RunAfterBuild: Check True to defer execution until after the full build finishes (so shape files and skins are loaded first before renaming).
- Revert: Check True to reverse the renaming direction (e.g. for entry old = new, 'new' will be renamed to 'old').
- RenameList: List of old_name = new_name entries.
VisAttrsCreates visibility attributes (Off/On enum) on a target control and connects them to the14_VisAttrs

Creates visibility attributes (Off/On enum) on a target control and connects them to the visibility of specified nodes.

Default block name VisAttrs · icon VisAttrs.png · exec_vis_attrs_v001.py

commands
exec_vis_attrs_v001.create_vis_attrs_block()
exec_vis_attrs_v001.build_vis_attrs_block()

Config attributes

AttributeTypeDefault / options
DefaultOnboolTrue
SetTargetCtrlstringempty
VisAttrsListstringempty

Artist help text

Help
Overview:
  Creates visibility enum attributes (Off/On) on a target control and connects them to the visibility of specified nodes.

How To Use:
  1. Create the block.
  2. Select the control that will hold the visibility attributes, and click 'Add Selected' or type its name in SetTargetCtrl.
  3. In VisAttrsList, specify the attribute name and the driven nodes in the format:
     AttrName = Node1, Node2
     Example:
     Hair = L_Hair_Geo, R_Hair_Geo
     Jacket = Jacket_Geo
  4. When you click Build, the attributes will be added to the target control and connected to the nodes' visibility.

Fields:
- SetTargetCtrl: The control that will hold the visibility attributes.
- VisAttrsList: List of entries in the format: AttrName = Node1, Node2
- DefaultOn: If True, attributes will default to On. If False, they will default to Off.
PickwalkImports pickwalk attributes from a JSON file and applies quickPick direction links to ri15_Pickwalk

Imports pickwalk attributes from a JSON file and applies quickPick direction links to rig controls.

Default block name Pickwalk · icon pickwalk.png · exec_pickwalk_v001.py

commands
exec_pickwalk_v001.create_pickwalk_block()
exec_pickwalk_v001.build_pickwalk_block()

Config attributes

AttributeTypeDefault / options
PickwalkFilestringempty
RunAfterBuildboolFalse
RunBeforeBuildboolFalse

Artist help text

Help
Overview:
  Imports pickwalk (quickPick) direction attributes from a JSON file and applies them to rig controls.

How To Use:
  1. Create the block.
  2. Set the PickwalkFile field to the path of your pickwalk JSON file, or click Browse to select one.
  3. Click Build to import and apply the pickwalk attributes.

Fields:
- PickwalkFile: Path to the pickwalk JSON file containing quickPick direction attributes.

JSON Format:
  The file should contain a dictionary of control names mapped to their quickPick attributes:
  { "Ctrl_Name": { "quickPick_left": "Other_Ctrl", "quickPick_right": "Another_Ctrl" } }

Tips:
- Use the pickwalk export tools to generate the JSON file from an existing rig.
- Attributes are created if they don't exist, or updated if they do.
SculptDeformerSculpt Deformer with control and mirror support16_SculptDeformer

Sculpt Deformer with control and mirror support

Default block name SculptDeformer · icon SculptDeformer.png · exec_sculpt_deformer_v001.py

commands
exec_sculpt_deformer_v001.create_sculpt_deformer_block()
exec_sculpt_deformer_v001.build_sculpt_deformer_block()

Config attributes

AttributeTypeDefault / options
CtrlColorenumlightBlue · blue · white · purple · green · red · yellow · grey
CtrlSizeint 1-201
MirrorenumFalse · True · Right_Only
RunAfterBuildboolFalse
Scalestring10,1,10
SetGeostringempty
SetParentstringnew_locator

Artist help text

Help
Overview:
  Sculpt Deformer with control, two locators (sculptor + stretch origin), and mirror support.

How To Use:
  Fill in the fields below then build.

Fields:
- SetGeo: comma-separated list of target geometry names.
- SetParent: parent node for the built rig. If left as 'new_locator', a placeholder locator is created.
- Mirror: False builds as-is. True builds both L_ and R_ sides (auto-prefixes L_ if needed). Right_Only builds only the R_ side mirrored from the guide.
- CtrlSize: size of the control curve (default 1).
- CtrlColor: color of the control curve.
- Scale: comma-separated XYZ scale for the sculpt deformer (default 10,1,10 for flattening).

Tips:
- When Mirror is True, R_ side SetGeo names are auto-derived by replacing L_ with R_.
- The sculptor locator drives the deformer position; the stretch origin sets the sculpt stretch origin.
- Template parent examples: Spine_End_Jnt, Head_Jnt, L_Wrist_Jnt.
sn lipsWill create mouth system (sn_lips version)17_sn_lips

Will create mouth system (sn_lips version)

Default block name sn_lips · icon Lips.png · exec_sn_lips_v001.py

commands
exec_sn_lips_v001.create_sn_lips_block()
exec_sn_lips_v001.build_sn_lips_block()

Config attributes

AttributeTypeDefault / options
CtrlSizeint 1-204
MirrorenumTrue · False · Right_Only
SetAttrsPositionstringnew_locator
SetLowerEdgestringempty
SetParentstringnew_locator
SetUpperEdgestringempty
SetupOptionenumCurve · Bezier

Artist help text

Help
Overview:
  Will create mouth system (sn_lips version).

How To Use:
  fill the key fields below before build.

Fields:
- SetParent: set the target node name.
- If left as default, the tool uses placeholder behavior for setup.
- SetAttrsPosition: set the target node name.
- If left as default, the tool uses placeholder behavior for setup.
- Mirror: choose one option (for example: True, False, Right_Only).
- SetupOption: choose one option (for example: Curve, Bezier).
- CtrlSize: numeric value that controls size/amount/intensity (default 4).
- SetUpperEdge: set the node/object name this block should use.
- Template parent examples: Jaw_Jnt, Head_Jnt, Head_Ctrl.
- Template attrs-position examples: Lips_Center_Ctrl, Vis_Ctrl, Mouth_Jaw_Ctrl.

Tips:
- start with defaults, build once, then tweak only the fields you need.
custom finger scalesCustom finger scaling system for independent phalange scaling. Parents all finger jointscustom_finger_scales

Custom finger scaling system for independent phalange scaling. Parents all finger joints to Palm_Jnt and removes scale constraints for both L_ and R_ hands.

Default block name Custom_Finger_Scales · icon FingersScale.png · exec_custom_finger_scales_v001.py

commands
exec_custom_finger_scales_v001.create_custom_finger_scales_block()
exec_custom_finger_scales_v001.build_custom_finger_scales_block()

Artist help text

Help
Overview:
  Creates a system to scale each finger phalange independently.

How To Use:
  Build this block after your rig hand joints and controls exist.

Behavior:
- Parents all finger joints to Palm_Jnt for both L_ and R_.
- Removes all scale constraints from finger joints.
- Connects control scale attributes to joint scale with axis remap.
- Allows per-phalanx scaling for animation and rigging flexibility.

Biped 002_Biped#

Human body modules - spine, limbs, hands, feet, head.

SimpleSpineThis will create a Simpler IK FK Spine System001_SimpleSpine

This will create a Simpler IK FK Spine System

Default block name Spine · icon SimpleSpine.png · exec_spine_v001.py

commands
exec_simple_spine.create_spine_block()
exec_simple_spine.build_spine_block()

Config attributes

AttributeTypeDefault / options
CtrlSizeint 1-204
SetGameParentstringempty
SetParentstringnew_locator

Artist help text

Help
Overview:
  This will create a Simpler IK FK Spine System.

How To Use:
  fill the key fields below before build.

Fields:
- SetParent: set the target node name.
- If left as default, the tool uses placeholder behavior for setup.
- CtrlSize: numeric value that controls size/amount/intensity (default 4).
- SetGameParent: set the node/object name this block should use.
- Template parent examples: Spine_End_Jnt, Spine_Inv_Jnt, Spine_F_Jnt.

Tips:
- start with defaults, build once, then tweak only the fields you need.
SpineThis will create a IK FK Spine System001_Spine

This will create a IK FK Spine System

Default block name Spine · icon Spine.png · exec_spine_v001.py

commands
exec_spine_v001.create_spine_block()
exec_spine_v001.build_spine_block()

Config attributes

AttributeTypeDefault / options
BreathboolFalse
CtrlSizeint 1-204
OrientToWorldboolTrue
SetGameParentstringempty
SetParentstringnew_locator

Artist help text

Help
Overview:
  This will create a IK FK Spine System.

How To Use:
  fill the key fields below before build.

Fields:
- SetParent: set the target node name.
- If left as default, the tool uses placeholder behavior for setup.
- CtrlSize: numeric value that controls size/amount/intensity (default 4).
- Breath: turn this ON/OFF depending on whether you want that feature.
- OrientToWorld: turn this ON/OFF depending on whether you want that feature.
- SetGameParent: set the node/object name this block should use.
- Template parent examples: Spine_End_Jnt, Spine_Inv_Jnt, Spine_F_Jnt.

Tips:
- if a field says left/right or mirror, use it to generate the opposite side quickly.
ClavicleThis will create a Clavicle system.002_Clavicle

This will create a Clavicle system.

Default block name L_Clavicle · icon Clavicle.png · exec_clavicle_v001.py

commands
exec_clavicle_v001.create_clavicle_block()
exec_clavicle_v001.build_clavicle_block()

Config attributes

AttributeTypeDefault / options
CtrlSizeint 1-204
CtrlTypeenumsquare · sphere · cube · octagon · hexagon · pringle · feet · hand …
MirrorenumTrue · False · Right_Only
SetGameParentstringempty
SetParentstringnew_locator

Artist help text

Help
Overview:
  This will create a Clavicle system.

How To Use:
  fill the key fields below before build.

Fields:
- SetParent: set the target node name.
- If left as default, the tool uses placeholder behavior for setup.
- Mirror: choose one option (for example: True, False, Right_Only).
- CtrlType: choose one option (for example: square, sphere, cube, octagon).
- CtrlSize: numeric value that controls size/amount/intensity (default 4).
- SetGameParent: set the node/object name this block should use.
- Template parent examples: L_Clavicle_Jnt, L_Clavicle_Ctrl, StellarClavicle.

Tips:
- start with defaults, build once, then tweak only the fields you need.
PelvisThis will create a Pelvis System to connect your legs003_Pelvis

This will create a Pelvis System to connect your legs

Default block name L_Pelvis · icon Pelvis.png · exec_pelvis_v001.py

commands
exec_pelvis_v001.create_pelvis_block()
exec_pelvis_v001.build_pelvis_block()

Config attributes

AttributeTypeDefault / options
CtrlSizeint 1-204
CtrlTypeenumhexagon · sphere · cube · square · octagon · pringle · feet · hand …
MirrorenumTrue · False · Right_Only
SetGameParentstringempty
SetParentstringnew_locator

Artist help text

Help
Overview:
  This will create a Pelvis System to connect your legs.

How To Use:
  fill the key fields below before build.

Fields:
- SetParent: set the target node name.
- If left as default, the tool uses placeholder behavior for setup.
- Mirror: choose one option (for example: True, False, Right_Only).
- CtrlType: choose one option (for example: hexagon, sphere, cube, square).
- CtrlSize: numeric value that controls size/amount/intensity (default 4).
- SetGameParent: set the node/object name this block should use.
- Template parent examples: L_Pelvis_Jnt, L_Pelvis_Ctrl, L_LegSlideSlideDriver_Loc.

Tips:
- start with defaults, build once, then tweak only the fields you need.
LimbThis will create a Limb System004_Limb

This will create a Limb System

Default block name L_Shoulder,L_Elbow,L_Wrist · icon Limb.png · exec_limb_v001.py

commands
exec_limb_v001.create_limb_block()
exec_limb_v001.build_limb_block()

Config attributes

AttributeTypeDefault / options
CtrlSizeint 1-204
FKCtrlTypeenumbounding_cube · circleY · circleX · circleY · pin_cube
ForceIkWorldboolFalse
IkCtrlTypeenumcube · sphere
IkTopCtrlTypeenumpin_cube · cube · sphere · circleY · circleX · circleY
MirrorenumTrue · False · Right_Only
PVCtrlTypeenumsphere · cube
RibbonsboolTrue
ScaleTweakCtrlsboolFalse
SetGameParentstringempty
SetParentstringnew_locator
TwistAmountint 1-204

Artist help text

Help
Overview:
  This will create a Limb System.

How To Use:
  fill the key fields below before build.

Fields:
- SetParent: set the target node name.
- If left as default, the tool uses placeholder behavior for setup.
- Mirror: choose one option (for example: True, False, Right_Only).
- Ribbons: turn this ON/OFF depending on whether you want that feature.
- CtrlSize: numeric value that controls size/amount/intensity (default 4).
- TwistAmount: numeric value that controls size/amount/intensity (default 4).
- IkCtrlType: choose one option (for example: cube, sphere).
- Template parent examples: L_Wrist_Jnt, L_Elbow_Bnd_2_Bnd, R_Elbow_Bnd_2_Bnd.

Tips:
- if a field says left/right or mirror, use it to generate the opposite side quickly.
SimpleLimbThis will create a simple Limb System004_SimpleLimb

This will create a simple Limb System

Default block name L_Shoulder,L_Elbow,L_Wrist · icon SimpleLimb.png · exec_simplelimb_v001.py

commands
exec_simplelimb_v001.create_limb_block()
exec_simplelimb_v001.build_limb_block()

Config attributes

AttributeTypeDefault / options
CtrlSizeint 1-204
FKCtrlTypeenumbounding_cube · circleY · circleX · circleY · pin_cube
IkCtrlTypeenumcube · sphere
IkTopCtrlTypeenumpin_cube · cube · sphere · circleY · circleX · circleY
MirrorenumTrue · False · Right_Only
PVCtrlTypeenumsphere · cube
RibbonCtrlsint 1-203
RibbonsboolTrue
SetGameParentstringempty
SetParentstringnew_locator
TwistAmountint 1-203

Artist help text

Help
Overview:
  This will create a simple Limb System.

How To Use:
  fill the key fields below before build.

Fields:
- SetParent: set the target node name.
- If left as default, the tool uses placeholder behavior for setup.
- Mirror: choose one option (for example: True, False, Right_Only).
- Ribbons: turn this ON/OFF depending on whether you want that feature.
- CtrlSize: numeric value that controls size/amount/intensity (default 4).
- TwistAmount: numeric value that controls size/amount/intensity (default 3).
- RibbonCtrls: numeric value that controls size/amount/intensity (default 3).
- Template parent examples: L_Wrist_Jnt, L_Elbow_Bnd_2_Bnd, R_Elbow_Bnd_2_Bnd.

Tips:
- if a field says left/right or mirror, use it to generate the opposite side quickly.
HeadThis will create a Neck and a Head System005_Head

This will create a Neck and a Head System

Default block name Neck,Head · icon HeadNeck.png · exec_head_v001.py

commands
exec_head_v001.create_head_block()
exec_head_v001.build_head_block()

Config attributes

AttributeTypeDefault / options
CtrlColorenumyellow · lightBlue · blue · white · purple · green · red · grey
CtrlSizeint 1-204
HeadCtrlTypeenumoctagon · hexagon · square · sphere · cube · pringle · feet · hand …
RibbonboolTrue
SecundaryRibbonint 1-203
SetGameParentstringempty
SetParentstringnew_locator

Artist help text

Help
Overview:
  This will create a Neck and a Head System.

How To Use:
  fill the key fields below before build.

Fields:
- SetParent: set the target node name.
- If left as default, the tool uses placeholder behavior for setup.
- HeadCtrlType: choose one option (for example: octagon, hexagon, square, sphere).
- Ribbon: turn this ON/OFF depending on whether you want that feature.
- SecundaryRibbon: numeric value that controls size/amount/intensity (default 3).
- CtrlSize: numeric value that controls size/amount/intensity (default 4).
- CtrlColor: choose one option (for example: yellow, lightBlue, blue, white).
- Template parent examples: Head_Jnt, L_Hand_Ankle_Jnt, Head_Ctrl.

Tips:
- if a field says left/right or mirror, use it to generate the opposite side quickly.
HandHand Block with 5 fingers or less006_Hand

Hand Block with 5 fingers or less

Default block name L_Hand · icon Hand.png · exec_hand_v001.py

commands
exec_hand_v001.create_hand_block()
exec_hand_v001.build_hand_block()

Config attributes

AttributeTypeDefault / options
CreateFingersAttrsboolTrue
CtrlSizeint 1-204
CtrlTypeenumcircleX · circleY · circleZ · bounding_cube · pin_cube
MirrorenumTrue · False · Right_Only
SetAttrsCtrlstringnew_ctrl
SetCtrlAttrsParentstringL_Hand_Palm_Jnt
SetGameParentstringempty
SetParentstringnew_locator
SetVisAttrstringempty

Artist help text

Help
Overview:
  Hand Block with 5 fingers or less.

How To Use:
  fill the key fields below before build.

Fields:
- SetParent: set the target node name.
- If left as default, the tool uses placeholder behavior for setup.
- SetAttrsCtrl: set the target node name.
- If left as default, the tool uses placeholder behavior for setup.
- CreateFingersAttrs: turn this ON/OFF depending on whether you want that feature.
- CtrlSize: numeric value that controls size/amount/intensity (default 4).
- CtrlType: choose one option (for example: circleX, circleY, circleZ, bounding_cube).
- Mirror: choose one option (for example: True, False, Right_Only).
- Template parent examples: L_Hand_Ankle_Jnt, L_Hand_Palm_Jnt, Spine_End_Jnt.

Tips:
- if a field says left/right or mirror, use it to generate the opposite side quickly.
FootThis will create a Foot System for FK and IK Legs007_Foot

This will create a Foot System for FK and IK Legs

Default block name L_Foot · icon Foot.png · exec_foot_v001.py

commands
exec_foot_v001.create_foot_block()
exec_foot_v001.build_foot_block()

Config attributes

AttributeTypeDefault / options
CtrlSizeint 1-201
IKLegstringnew_locator
IkAttrsPositionstringnew_locator
MirrorenumTrue · False · Right_Only
ParallelToFloorboolFalse
SetFKCtrlstringnew_locator
SetGameParentstringempty
SetIKCtrlstringnew_locator
SwitchIKFKAttrstringnew_attr

Artist help text

Help
Overview:
  This will create a Foot System for FK and IK Legs.

How To Use:
  fill the key fields below before build.

Fields:
- Mirror: choose one option (for example: True, False, Right_Only).
- CtrlSize: numeric value that controls size/amount/intensity (default 1).
- SetIKCtrl: set the target node name.
- If left as default, the tool uses placeholder behavior for setup.
- SetFKCtrl: set the target node name.
- If left as default, the tool uses placeholder behavior for setup.
- SwitchIKFKAttr: set the target node name.
- If left as default, the tool uses placeholder behavior for setup.
- IkAttrsPosition: set the target node name.
- If left as default, the tool uses placeholder behavior for setup.
- ParallelToFloor: if checked, the L_Foot_Toes_Ctrl will be oriented parallel to the floor (custom code required in Python).
- Template parent examples: L_Hand_Ankle_Jnt, L_Foot_Ankle_Jnt, L_LegSlideSlideDriver_Loc.

Tips:
- start with defaults, build once, then tweak only the fields you need.
EyesWill create eyes aim system008_Eyes

Will create eyes aim system

Default block name L_Eyes · icon Eyes.png · exec_eyes_v001.py

commands
exec_eyes_v001.create_eyes_block()
exec_eyes_v001.build_eyes_block()

Config attributes

AttributeTypeDefault / options
CtrlSizeint 1-204
EyesAmountenumTwo · One
SetParentstringnew_locator

Artist help text

Help
Overview:
  Will create eyes aim system.

How To Use:
  fill the key fields below before build.

Fields:
- SetParent: set the target node name.
- If left as default, the tool uses placeholder behavior for setup.
- EyesAmount: choose one option (for example: Two, One).
- CtrlSize: numeric value that controls size/amount/intensity (default 4).
- Template parent examples: Spine_End_Jnt, Head_Jnt, L_Wrist_Jnt.

Tips:
- start with defaults, build once, then tweak only the fields you need.
Smart RFLWill create a fancy RFL system for current Feet009_Smart_RFL

Will create a fancy RFL system for current Feet

Default block name Smart_RFL · icon RFL.png · exec_smart_rfl_v001.py

commands
exec_smart_rfl_v001.create_smart_rfl_block()
exec_smart_rfl_v001.build_smart_rfl_block()

Config attributes

AttributeTypeDefault / options
AltModeenumOriginal · SCL · SN
SetFootBlockNamestringempty
SetRFLAttrsPositionstringL_Ankle_Ik_Ctrl
TransferAttrsboolTrue

Artist help text

Help
Overview:
  Will create a fancy RFL system for current Feet.

How To Use:
  fill the key fields below before build.

Fields:
- AltMode: choose Original, SCL, or SN. Original keeps the classic Smart RFL behavior, SCL matches the legacy Alt Mode, and SN uses the alternate setup with RY behaving like PivotBallFloor.
- TransferAttrs: turn this ON/OFF depending on whether you want that feature.
- SetRFLAttrsPosition: set the node/object name this block should use.
- SetFootBlockName: set the foot block base name this block should use for SCL and SN.

Tips:
- if a field says left/right or mirror, use it to generate the opposite side quickly.
FootBoxCreate foot boxes geos for the foot block010_FootBox

Create foot boxes geos for the foot block

Default block name L_FootBox · icon FootBox.png · exec_footbox_v001.py

commands
exec_footbox_v001.create_footbox_block()
exec_footbox_v001.build_footbox_block()

Config attributes

AttributeTypeDefault / options
Colorenumpink · orange · blue · light_blue · red · green · purple · yellow …
ForceYZeroboolTrue
MirrorboolTrue
SetAttrsPositionstringnew_locator
SetBallFloorstringempty
SetBallParentstringempty
SetHeelParentstringempty
SetHeelstringempty
SetInstringempty
SetOutstringempty
SetToesstringempty

Artist help text

Help
Overview:
  Create foot boxes geos for the foot block.

How To Use:
  fill the key fields below before build.

Fields:
- SetAttrsPosition: set the target node name.
- If left as default, the tool uses placeholder behavior for setup.
- Mirror: turn this ON/OFF depending on whether you want that feature.
- Color: choose one option (for example: pink, orange, blue, light_blue).
- ForceYZero: turn this ON/OFF depending on whether you want that feature.
- SetToes: set the node/object name this block should use.
- SetBallFloor: set the node/object name this block should use.
- Template parent examples: L_Foot_Ankle_Jnt, Spine_End_Jnt, Head_Jnt.
- Template attrs-position examples: Vis_Ctrl, L_Eyelids_Scale_Ctrl, L_Brow_Ctrl.

Tips:
- if a field says left/right or mirror, use it to generate the opposite side quickly.
HairWill create multiple FK chains for a hair setup.011_Hair

Will create multiple FK chains for a hair setup.

Default block name Hair · icon Hair.png · exec_hair_v001.py

commands
exec_hair_v001.create_hair_block()
exec_hair_v001.build_hair_block()

Config attributes

AttributeTypeDefault / options
AutoRotateboolFalse
CtrlColorenumlightBlue · blue · white · purple · green · red · yellow · grey
CtrlSizeint 1-201
CtrlTypeenumcircleY · circleX · circleZ · square · sphere · cube · octagon · hexagon …
MirrorboolFalse
SetLockAttrsstringempty
SetLockGuidesstringempty
SetLockPinstringempty
SetParentstringnew_locator
SubAutoRotateboolFalse
TwistAxisenumX · Y · Z

Artist help text

Help
Overview:
  Will create multiple FK chains for a hair setup.

How To Use:
  fill the key fields below before build.

Fields:
- SetParent: set the target node name.
- If left as default, the tool uses placeholder behavior for setup.
- Mirror: turn this ON/OFF depending on whether you want that feature.
- AutoRotate: turn this ON/OFF depending on whether you want that feature.
- SubAutoRotate: turn this ON/OFF depending on whether you want that feature.
- CtrlSize: numeric value that controls size/amount/intensity (default 1).
- CtrlColor: choose one option (for example: lightBlue, blue, white, purple).
- Template parent examples: Spine_End_Jnt, Head_Jnt, L_Wrist_Jnt.

Tips:
- if a field says left/right or mirror, use it to generate the opposite side quickly.
AutoClavicleThis will create an automatic clavicle reader system.012_AutoClavicle

This will create an automatic clavicle reader system.

Default block name AutoClavicle · icon AutoClavicle.png · exec_autoclavicle_v001.py

commands
exec_autoclavicle_v001.create_auto_clavicle_block()
exec_autoclavicle_v001.build_auto_clavicle_block()

Config attributes

AttributeTypeDefault / options
ClavicleCtrlstringL_Clavicle_Ctrl
FKShoulderCtrlstringL_Shoulder_FK_Ctrl
MirrorenumTrue · False

Artist help text

Help
Overview:
  This will create an automatic clavicle reader system.

How To Use:
  fill the key fields below before build.

Fields:
- ClavicleCtrl: set the clavicle control name.
- FKShoulderCtrl: set the FK shoulder controller name.
- Mirror: choose one option (for example: True, False, Right_Only).

Tips:
- start with defaults, build once, then tweak only the fields you need.
LegSoftIKCreates a utility Soft IK setup for existing biped legs.013_LegSoftIK

Creates a utility Soft IK setup for existing biped legs.

Default block name LegSoftIK · icon softIkLeg.png · exec_leg_softik_v001.py

commands
exec_leg_softik_v001.create_leg_softik_block()
exec_leg_softik_v001.build_leg_softik_block()

Config attributes

AttributeTypeDefault / options
GlobalScaleAttrstringGlobal_Ctrl.size
LeftAnkleCtrlstringL_Ankle_Ik_Ctrl
LeftAnkleRFLGroupstringL_Foot_Ankle_RFL_Grp
LeftIKHandlestringL_Ankle_Ik_IKrp
LeftKneeIkJointstringL_Knee_Ik_Jnt
LeftPelvisCtrlstringL_Pelvis_Ctrl
LeftPinAttrstringL_KneeMid_Bendy_Ctrl|L_Hip_Jnt_Switch_Loc.Pole_Vector_Lock
LeftSoftAttrHolderstringL_Ankle_Ik_Ctrl
LeftSoftIkAttrHolderstringL_Hip_Jnt_Switch_Loc
LeftStretchAttrstringL_KneeMid_Bendy_Ctrl|L_Hip_Jnt_Switch_Loc.Stretch_On
MirrorenumTrue · False · Right_Only
MoverScaleAttrstringMover_Ctrl.size

Artist help text

Help
Overview:
  Creates a utility Soft IK setup for existing biped legs.

How To Use:
  build the leg and foot first, then select this block and run Build.

Fields:
- Mirror: build left only, right only, or both sides from the left-side names below.
- LeftAnkleCtrl: IK ankle control used by the leg Soft IK setup.
- LeftSoftIkAttrHolder: node that will receive the SoftIk attr and drive Soft IK amount. Right side is mirrored automatically.
- LeftSoftAttrHolder: deprecated legacy holder for compatibility.
- LeftAnkleRFLGroup: reverse foot ankle group that will own the Soft IK offset groups.
- LeftPelvisCtrl: pelvis or hip control used as the upper distance target.
- LeftIKHandle: ankle IK handle to offset with Soft IK.
- LeftKneeIkJoint: knee IK joint driven through plusMinusAverage.
- LeftStretchAttr: stretch enable attr path used by the expression.
- LeftPinAttr: pole vector pin attr path used by the expression.
- GlobalScaleAttr: normalized global size attr path.
- MoverScaleAttr: normalized mover size attr path.

Tips:
- Default values assume the standard biped limb and foot naming.
- DistanceDimension nodes are parented under the misc rig group.
- Rebuild after changing any of the paths above.
SmartHandControl Fingers in a smarter way.01_SmartHand

Control Fingers in a smarter way.

Default block name SmartHand · icon SmartHand.png · exec_smarthand_v001.py

commands
exec_smarthand_v001.create_smarthand_block()
exec_smarthand_v001.build_smarthand_block()

Config attributes

AttributeTypeDefault / options
HandBlockstringL_Hand
ModeenumA · B

Artist help text

Help
Overview:
  Control Fingers in a smarter way.

How To Use:
  fill the key fields below before build.

Fields:
- HandBlock: set the node/object name this block should use.

Tips:
- start with defaults, build once, then tweak only the fields you need.
ClavicleAdvanceThis will create a Clavicle Advance system02_ClavicleAdvance

This will create a Clavicle Advance system

Default block name ClavicleAdvance · icon ClavicleAdvance.png · exec_clavicleadvance_v001.py

commands
exec_clavicleadvance_v001.create_clavicleadvance_block()
exec_clavicleadvance_v001.build_clavicleadvance_block()

Config attributes

AttributeTypeDefault / options
MirrorenumTrue · False · Right_Only
RibbonboolTrue
SetGameParentstringempty
SetParentstringnew_locator
TwistAmountint 1-204

Artist help text

Help
Overview:
  This will create a Clavicle Advance system.

How To Use:
  fill the key fields below before build.

Fields:
- SetParent: set the target node name.
- If left as default, the tool uses placeholder behavior for setup.
- Mirror: choose one option (for example: True, False, Right_Only).
- TwistAmount: numeric value that controls size/amount/intensity (default 4).
- Ribbon: turn this ON/OFF depending on whether you want that feature.
- SetGameParent: set the node/object name this block should use.
- Template parent examples: L_Clavicle_Jnt, L_Clavicle_Ctrl, StellarClavicle.

Tips:
- if a field says left/right or mirror, use it to generate the opposite side quickly.

Facial 003_Facial#

Face modules, from jaw and mouth down to sticky lips and pupil dilation.

SkullCreate base structure for head rig001_Skull

Create base structure for head rig

Default block name Skull · icon Skull.png · exec_skull_v001.py

commands
exec_skull_v001.create_skull_block()
exec_skull_v001.build_skull_block()

Config attributes

AttributeTypeDefault / options
CtrlColorenumlightBlue · blue · white · purple · green · red · yellow · grey
CtrlSizeint 1-204
CtrlTypeenumcube · square · circleX · circleY · circleZ
SetAttrsPositionstringnew_locator
SetParentstringnew_locator

Artist help text

Help
Overview:
  Create base structure for head rig.

How To Use:
  fill the key fields below before build.

Fields:
- SetParent: set the target node name.
- If left as default, the tool uses placeholder behavior for setup.
- SetAttrsPosition: set the target node name.
- If left as default, the tool uses placeholder behavior for setup.
- CtrlType: choose one option (for example: cube, square, circleX, circleY).
- CtrlSize: numeric value that controls size/amount/intensity (default 4).
- CtrlColor: choose one option (for example: lightBlue, blue, white, purple).
- Template parent examples: Head_Jnt, Head_Ctrl, Spine_End_Jnt.
- Template attrs-position examples: Nose_Base_Ctrl, Vis_Ctrl, L_Brow_Ctrl.

Tips:
- start with defaults, build once, then tweak only the fields you need.
JawWill create jaw rig002_Jaw

Will create jaw rig

Default block name Jaw · icon Jaw.png · exec_jaw_v001.py

commands
exec_jaw_v001.create_jaw_block()
exec_jaw_v001.build_jaw_block()

Config attributes

AttributeTypeDefault / options
CtrlSizeint 1-204
CtrlTypeenumcircleY · circleX · circleZ · square
GameModeboolFalse
SetAttrsPositionstringnew_locator
SetParentstringnew_locator

Artist help text

Help
Overview:
  Will create jaw rig.

How To Use:
  fill the key fields below before build.

Fields:
- SetParent: set the target node name.
- If left as default, the tool uses placeholder behavior for setup.
- SetAttrsPosition: set the target node name.
- If left as default, the tool uses placeholder behavior for setup.
- CtrlType: choose one option (for example: circleY, circleX, circleZ, square).
- CtrlSize: numeric value that controls size/amount/intensity (default 4).
- GameMode: turn this ON/OFF depending on whether you want that feature.
- Template parent examples: Jaw_Jnt, Head_Jnt, Head_Ctrl.
- Template attrs-position examples: Vis_Ctrl, Jaw_Ctrl, Lips_Center_Ctrl.

Tips:
- if a field says left/right or mirror, use it to generate the opposite side quickly.
MouthWill create mouth system003_Mouth

Will create mouth system

Default block name Lips · icon Lips.png · exec_mouth_v001.py

commands
exec_mouth_v001.create_mouth_block()
exec_mouth_v001.build_mouth_block()

Config attributes

AttributeTypeDefault / options
CtrlSizeint 1-204
MirrorenumTrue · False · Right_Only
SetAttrsPositionstringnew_locator
SetLowerEdgestringempty
SetParentstringnew_locator
SetUpperEdgestringempty
SetupOptionenumCurve · Bezier

Artist help text

Help
Overview:
  Will create mouth system.

How To Use:
  fill the key fields below before build.

Fields:
- SetParent: set the target node name.
- If left as default, the tool uses placeholder behavior for setup.
- SetAttrsPosition: set the target node name.
- If left as default, the tool uses placeholder behavior for setup.
- Mirror: choose one option (for example: True, False, Right_Only).
- SetupOption: choose one option (for example: Curve, Bezier).
- CtrlSize: numeric value that controls size/amount/intensity (default 4).
- SetUpperEdge: set the node/object name this block should use.
- Template parent examples: Jaw_Jnt, Head_Jnt, Head_Ctrl.
- Template attrs-position examples: Lips_Center_Ctrl, Vis_Ctrl, Mouth_Jaw_Ctrl.

Tips:
- start with defaults, build once, then tweak only the fields you need.
MouthGamesCreate JaW and Lips System for Games003_MouthGames

Create JaW and Lips System for Games

Default block name Mouth · icon MouthGames.png · exec_mouthgames_v001.py

commands
exec_mouthgames_v001.create_mouthgames_block()
exec_mouthgames_v001.build_mouthgames_block()

Config attributes

AttributeTypeDefault / options
CtrlSizeint 1-204
MidCtrlsAmountint 1-205
SetAttrsPositionstringnew_locator
SetLowerEdgestringempty
SetParentstringnew_locator
SetUpperEdgestringempty
TweakCtrlsAmountint 1-207

Artist help text

Help
Overview:
  Create JaW and Lips System for Games.

How To Use:
  fill the key fields below before build.

Fields:
- SetParent: set the target node name.
- If left as default, the tool uses placeholder behavior for setup.
- SetAttrsPosition: set the target node name.
- If left as default, the tool uses placeholder behavior for setup.
- TweakCtrlsAmount: numeric value that controls size/amount/intensity (default 7).
- MidCtrlsAmount: numeric value that controls size/amount/intensity (default 5).
- CtrlSize: numeric value that controls size/amount/intensity (default 4).
- SetUpperEdge: set the node/object name this block should use.
- Template parent examples: Jaw_Jnt, Head_Jnt, Head_Ctrl.
- Template attrs-position examples: Lips_Center_Ctrl, Vis_Ctrl, Mouth_Jaw_Ctrl.

Tips:
- start with defaults, build once, then tweak only the fields you need.
RibbonMouthWill create ribbons mouth system003_RibbonMouth

Will create ribbons mouth system

Default block name Lips · icon RibbonLips.png · exec_ribbon_mouth_v001.py

commands
exec_ribbon_mouth_v001.create_mouth_block()
exec_ribbon_mouth_v001.build_mouth_block()

Config attributes

AttributeTypeDefault / options
CtrlSizeint 1-204
SetAttrsPositionstringnew_locator
SetLowerEdgestringempty
SetParentstringnew_locator
SetUpperEdgestringempty

Artist help text

Help
Overview:
  Will create ribbons mouth system.

How To Use:
  fill the key fields below before build.

Fields:
- SetParent: set the target node name.
- If left as default, the tool uses placeholder behavior for setup.
- SetAttrsPosition: set the target node name.
- If left as default, the tool uses placeholder behavior for setup.
- CtrlSize: numeric value that controls size/amount/intensity (default 4).
- SetUpperEdge: set the node/object name this block should use.
- SetLowerEdge: set the node/object name this block should use.
- Template parent examples: Jaw_Jnt, Head_Jnt, Head_Ctrl.
- Template attrs-position examples: Lips_Center_Ctrl, Vis_Ctrl, Mouth_Jaw_Ctrl.

Tips:
- start with defaults, build once, then tweak only the fields you need.
EyelidsEyelids Setup by Marco Giordano video 004_Eyelids

Eyelids Setup by Marco Giordano video

Default block name L_Eyelids · icon Eyes.png · exec_eyelids_v001.py

commands
exec_eyelids_v001.create_eyelids_block()
exec_eyelids_v001.build_eyelids_block()

Config attributes

AttributeTypeDefault / options
BindJointsenumPerVtx · 3 · 1
CtrlSizeint 1-204
GameModeboolFalse
LimitCtrlboolTrue
MirrorenumTrue · False · Right_Only
SetAttrsPositionstringnew_locator
SetEyePivotstringempty
SetLowerEdgestringempty
SetParentstringnew_locator
SetUpperEdgestringempty

Artist help text

Help
Overview:
  Eyelids Setup by Marco Giordano video.

How To Use:
  fill the key fields below before build.

Fields:
- SetParent: set the target node name.
- If left as default, the tool uses placeholder behavior for setup.
- SetAttrsPosition: set the target node name.
- If left as default, the tool uses placeholder behavior for setup.
- Mirror: choose one option (for example: True, False, Right_Only).
- CtrlSize: numeric value that controls size/amount/intensity (default 4).
- LimitCtrl: turn this ON/OFF depending on whether you want that feature.
- GameMode: turn this ON/OFF depending on whether you want that feature.
- Template parent examples: Head_Jnt, Head_Ctrl, Spine_End_Jnt.
- Template attrs-position examples: L_Eyelids_Scale_Ctrl, Vis_Ctrl, L_Brow_Ctrl.

Tips:
- if a field says left/right or mirror, use it to generate the opposite side quickly.
NoseWill create a local nose rig005_Nose

Will create a local nose rig

Default block name Nose · icon Nose.png · exec_nose_v001.py

commands
exec_nose_v001.create_nose_block()
exec_nose_v001.build_nose_block()

Config attributes

AttributeTypeDefault / options
CtrlSizeint 1-204
SetAttrsPositionstringnew_locator
SetParentstringnew_locator

Artist help text

Help
Overview:
  Will create a local nose rig.

How To Use:
  fill the key fields below before build.

Fields:
- SetParent: set the target node name.
- If left as default, the tool uses placeholder behavior for setup.
- SetAttrsPosition: set the target node name.
- If left as default, the tool uses placeholder behavior for setup.
- CtrlSize: numeric value that controls size/amount/intensity (default 4).
- Template parent examples: Head_Jnt, Head_Ctrl, Jaw_Jnt.
- Template attrs-position examples: Nose_Base_Ctrl, Vis_Ctrl, L_Brow_Ctrl.

Tips:
- start with defaults, build once, then tweak only the fields you need.
CheeksWill create a local Cheeck rig006_Cheeks

Will create a local Cheeck rig

Default block name L_Cheecks · icon Cheeks.png · exec_cheeks_v001.py

commands
exec_cheeks_v001.create_cheek_block()
exec_cheeks_v001.build_cheek_block()

Config attributes

AttributeTypeDefault / options
CtrlSizeint 1-204
MirrorenumTrue · False · Right_Only
SetAttrsPositionstringnew_locator
SetParentstringnew_locator

Artist help text

Help
Overview:
  Will create a local Cheeck rig.

How To Use:
  fill the key fields below before build.

Fields:
- SetParent: set the target node name.
- If left as default, the tool uses placeholder behavior for setup.
- SetAttrsPosition: set the target node name.
- If left as default, the tool uses placeholder behavior for setup.
- Mirror: choose one option (for example: True, False, Right_Only).
- CtrlSize: numeric value that controls size/amount/intensity (default 4).
- Template parent examples: Head_Jnt, Head_Ctrl, Spine_End_Jnt.
- Template attrs-position examples: L_Cheecks_Main_Ctrl, Vis_Ctrl, L_Brow_Ctrl.

Tips:
- start with defaults, build once, then tweak only the fields you need.
CheeksAdvanceWill create a local Cheeck rig007_CheeksAdvance

Will create a local Cheeck rig

Default block name L_Cheecks · icon CheeksAdvance.png · exec_cheeks_advance_v001.py

commands
exec_cheeks_advance_v001.create_cheek_block()
exec_cheeks_advance_v001.build_cheek_block()

Config attributes

AttributeTypeDefault / options
CtrlSizeint 1-204
MirrorenumTrue · False · Right_Only
SetAttrsPositionstringnew_locator
SetParentstringnew_locator

Artist help text

Help
Overview:
  Will create a local Cheeck rig.

How To Use:
  fill the key fields below before build.

Fields:
- SetParent: set the target node name.
- If left as default, the tool uses placeholder behavior for setup.
- SetAttrsPosition: set the target node name.
- If left as default, the tool uses placeholder behavior for setup.
- Mirror: choose one option (for example: True, False, Right_Only).
- CtrlSize: numeric value that controls size/amount/intensity (default 4).
- Template parent examples: Head_Jnt, Head_Ctrl, Spine_End_Jnt.
- Template attrs-position examples: L_Cheecks_Main_Ctrl, Vis_Ctrl, L_Brow_Ctrl.

Tips:
- start with defaults, build once, then tweak only the fields you need.
BrowsWill create a local Brows rig008_Brows

Will create a local Brows rig

Default block name L_Brow · icon Brows.png · exec_brows_v001.py

commands
exec_brows_v001.create_brows_block()
exec_brows_v001.build_brows_block()

Config attributes

AttributeTypeDefault / options
CtrlSizeint 1-204
GameModeboolFalse
MirrorenumTrue · False · Right_Only
SetAttrsPositionstringnew_locator
SetParentstringnew_locator

Artist help text

Help
Overview:
  Will create a local Brows rig.

How To Use:
  fill the key fields below before build.

Fields:
- SetParent: set the target node name.
- If left as default, the tool uses placeholder behavior for setup.
- SetAttrsPosition: set the target node name.
- If left as default, the tool uses placeholder behavior for setup.
- Mirror: choose one option (for example: True, False, Right_Only).
- CtrlSize: numeric value that controls size/amount/intensity (default 4).
- GameMode: turn this ON/OFF depending on whether you want that feature.
- Template parent examples: Head_Jnt, Head_Ctrl, Spine_End_Jnt.
- Template attrs-position examples: L_Brow_Ctrl, Vis_Ctrl, L_Eyelids_Scale_Ctrl.

Tips:
- if a field says left/right or mirror, use it to generate the opposite side quickly.
BrowsAdvanceWill create a local Advance Brows Rig009_BrowsAdvance

Will create a local Advance Brows Rig

Default block name L_Brow · icon BrowsAdvance.png · exec_brows_advance_v001.py

commands
exec_brows_advance_v001.create_brows_advance_block()
exec_brows_advance_v001.build_brows_advance_block()

Config attributes

AttributeTypeDefault / options
CtrlSizeint 1-204
MirrorenumTrue · False · Right_Only
SetAttrsPositionstringnew_locator
SetParentstringnew_locator

Artist help text

Help
Overview:
  Will create a local Advance Brows Rig.

How To Use:
  fill the key fields below before build.

Fields:
- SetParent: set the target node name.
- If left as default, the tool uses placeholder behavior for setup.
- SetAttrsPosition: set the target node name.
- If left as default, the tool uses placeholder behavior for setup.
- Mirror: choose one option (for example: True, False, Right_Only).
- CtrlSize: numeric value that controls size/amount/intensity (default 4).
- Template parent examples: Head_Jnt, Head_Ctrl, Spine_End_Jnt.
- Template attrs-position examples: L_Brow_Ctrl, Vis_Ctrl, L_Eyelids_Scale_Ctrl.

Tips:
- start with defaults, build once, then tweak only the fields you need.
Tonguecreate Tongue system010_Tongue

create Tongue system

Default block name Tongue · icon Tongue.png · exec_tongue_v001.py

commands
exec_tongue_v001.create_tongue_block()
exec_tongue_v001.build_tongue_block()

Config attributes

AttributeTypeDefault / options
CtrlColorenumlightBlue · blue · white · purple · green · red · yellow · grey
CtrlSizeint 1-204
SetAttrsPositionstringnew_locator
SetParentstringnew_locator

Artist help text

Help
Overview:
  create Tongue system.

How To Use:
  fill the key fields below before build.

Fields:
- SetParent: set the target node name.
- If left as default, the tool uses placeholder behavior for setup.
- SetAttrsPosition: set the target node name.
- If left as default, the tool uses placeholder behavior for setup.
- CtrlSize: numeric value that controls size/amount/intensity (default 4).
- CtrlColor: choose one option (for example: lightBlue, blue, white, purple).
- Template parent examples: Jaw_Jnt, Head_Jnt, Head_Ctrl.
- Template attrs-position examples: Vis_Ctrl, Lips_Center_Ctrl, Jaw_Ctrl.

Tips:
- start with defaults, build once, then tweak only the fields you need.
TeethWill Create Teeth System011_Teeth

Will Create Teeth System

Default block name Teeth · icon Teeth.png · exec_teeth_v001.py

commands
exec_teeth_v001.create_teeth_block()
exec_teeth_v001.build_teeth_block()

Config attributes

AttributeTypeDefault / options
CtrlSizeint 1-204
LwrTeethboolTrue
SetAttrsPositionstringnew_locator
SetJawJntstringempty
SetLwrParentstringnew_locator
SetUprParentstringnew_locator
UprTeethboolTrue

Artist help text

Help
Overview:
  Will Create Teeth System.

How To Use:
  fill the key fields below before build.

Fields:
- SetAttrsPosition: set the target node name.
- If left as default, the tool uses placeholder behavior for setup.
- UprTeeth: turn this ON/OFF depending on whether you want that feature.
- LwrTeeth: turn this ON/OFF depending on whether you want that feature.
- CtrlSize: numeric value that controls size/amount/intensity (default 4).
- SetUprParent: set the target node name.
- If left as default, the tool uses placeholder behavior for setup.
- SetLwrParent: set the target node name.
- If left as default, the tool uses placeholder behavior for setup.
- Template parent examples: Jaw_Jnt, Head_Jnt, Head_Ctrl.
- Template attrs-position examples: Vis_Ctrl, Lips_Center_Ctrl, Jaw_Ctrl.

Tips:
- if a field says left/right or mirror, use it to generate the opposite side quickly.
CommissuresThis will create a commissures systeam for the lips blendshapes012_Commissures

This will create a commissures systeam for the lips blendshapes

Default block name Commissures · icon Commissures.png · exec_commissures_v001.py

commands
exec_commissures_v001.create_commissures_block()
exec_commissures_v001.build_commissures_block()

Config attributes

AttributeTypeDefault / options
LeftCornerCtrlstringnew_locator
RightCornerCtrlstringnew_locator

Artist help text

Help
Overview:
  This will create a commissures systeam for the lips blendshapes.

How To Use:
  fill the key fields below before build.

Fields:
- LeftCornerCtrl: set the target node name.
- If left as default, the tool uses placeholder behavior for setup.
- RightCornerCtrl: set the target node name.
- If left as default, the tool uses placeholder behavior for setup.

Tips:
- start with defaults, build once, then tweak only the fields you need.
OrbicularisWill create Orbicularis Outside Eyelids Rig013_Orbicularis

Will create Orbicularis Outside Eyelids Rig

Default block name L_Orbicularis · icon Orbicularis.png · exec_orbicularis_v001.py

commands
exec_orbicularis_v001.create_orbicularis_block()
exec_orbicularis_v001.build_orbicularis_block()

Config attributes

AttributeTypeDefault / options
SetGeostringempty
SetParentstringnew_locator

Artist help text

Help
Overview:
  Will create Orbicularis Outside Eyelids Rig.

How To Use:
  fill the key fields below before build.

Fields:
- SetParent: set the target node name.
- If left as default, the tool uses placeholder behavior for setup.
- SetGeo: set the node/object name this block should use.
- Template parent examples: Head_Jnt, Head_Ctrl, Spine_End_Jnt.

Tips:
- start with defaults, build once, then tweak only the fields you need.
MouthPostBuildsWIll Improve current Mouth Systems014_MouthPostBuilds

WIll Improve current Mouth Systems

Default block name MouthPostBuilds · icon LipsPost.png · exec_mouthpostbuilds_v001.py

commands
exec_mouthpostbuilds_v001.create_mouthpostbuilds_block()
exec_mouthpostbuilds_v001.build_mouthpostbuilds_block()

Config attributes

AttributeTypeDefault / options
namestringLips

Artist help text

Help
Overview:
  WIll Improve current Mouth Systems.

How To Use:
  fill the key fields below before build.

Fields:
- name: set the node/object name this block should use.

Tips:
- start with defaults, build once, then tweak only the fields you need.
VisAttrsThis will create a ctrl to hold vis attrs015_VisAttrs

This will create a ctrl to hold vis attrs

Default block name VisAttrs · icon VisAttrs.png · exec_visattrs_v001.py

commands
exec_visattrs_v001.create_visattrs_block()
exec_visattrs_v001.build_visattrs_block()

Config attributes

AttributeTypeDefault / options
SetParentstringnew_locator

Artist help text

Help
Overview:
  This will create a ctrl to hold vis attrs.

How To Use:
  fill the key fields below before build.

Fields:
- SetParent: set the target node name.
- If left as default, the tool uses placeholder behavior for setup.
- Template parent examples: Head_Ctrl, Head_Jnt, Spine_End_Jnt.

Tips:
- start with defaults, build once, then tweak only the fields you need.
StickyLipsStickyLips System016_StickyLips

StickyLips System

Default block name StickyLips · icon Sticky.png · exec_stickylips_v001.py

commands
exec_stickylips_v001.create_stickylips_block()
exec_stickylips_v001.build_stickylips_block()

Config attributes

AttributeTypeDefault / options
SetFaceGeostringempty
SetJawBonestringempty
SetLeftMouthCtrlstringnew_locator
SetMouthEdgestringempty
SetNotJawBonestringempty

Artist help text

Help
Overview:
  StickyLips System.

How To Use:
  fill the key fields below before build.

Fields:
- SetJawBone: set the node/object name this block should use.
- SetNotJawBone: set the node/object name this block should use.
- SetLeftMouthCtrl: set the target node name.
- If left as default, the tool uses placeholder behavior for setup.
- SetMouthEdge: set the node/object name this block should use.
- SetFaceGeo: set the node/object name this block should use.

Tips:
- start with defaults, build once, then tweak only the fields you need.
PupilDilationWill create pupil dilation system017_PupilDilation

Will create pupil dilation system

Default block name L_PupilDilation · icon Pupil.png · exec_pupil_dilation_v001.py

commands
exec_pupil_dilation_v001.create_pupil_dilation_block()
exec_pupil_dilation_v001.build_pupil_dilation_block()

Config attributes

AttributeTypeDefault / options
MirrorboolTrue
SetBlendShapeNodestringnew_blendshape_node
SetEyeEdgeRingstringempty
SetEyeMeshstringempty
SetIrisEdgeLoopstringempty
SetTargetCtrlstringempty

Artist help text

Help
Overview:
  Will create pupil dilation system.

How To Use:
  fill the key fields below before build.

Fields:
- SetTargetCtrl: set the node/object name this block should use.
- Mirror: turn this ON/OFF depending on whether you want that feature.
- SetEyeMesh: set the node/object name this block should use.
- SetEyeEdgeRing: set the node/object name this block should use.
- SetIrisEdgeLoop: set the node/object name this block should use.
- SetBlendShapeNode: set the target node name.
- If left as default, the tool uses placeholder behavior for setup.
- Template target ctrl examples: Eyes_Main_Ctrl, Head_Ctrl, Neck_Ctrl.

Tips:
- if a field says left/right or mirror, use it to generate the opposite side quickly.
EyelashesThis will create an eyelash system over the eye block018_Eyelashes

This will create an eyelash system over the eye block

Default block name Eyelashes · icon Eyelashes.png · exec_eyelashes_v001.py

commands
exec_eyelashes_v001.create_eyelashes_block()
exec_eyelashes_v001.build_eyelashes_block()

Config attributes

AttributeTypeDefault / options
EyeNamestringL_Eyelids
SetAttrsPositionstringnew_locator

Artist help text

Help
Overview:
  This will create an eyelash system over the eye block.

How To Use:
  fill the key fields below before build.

Fields:
- SetAttrsPosition: set the target node name.
- If left as default, the tool uses placeholder behavior for setup.
- EyeName: set the node/object name this block should use.
- Template attrs-position examples: Vis_Ctrl, L_Brow_Ctrl, L_Eyelids_Scale_Ctrl.

Tips:
- start with defaults, build once, then tweak only the fields you need.

Animals 004_Animals#

Quadrupeds, wings, tails and other non-biped anatomy.

WingModuleWill Create single Wing Module01_WingModule

Will Create single Wing Module

Default block name L_WingExtra · icon WingModule.png · exec_wingmodule_v001.py

commands
exec_wingmodule_v001.create_wingmodule_block()
exec_wingmodule_v001.build_wingmodule_block()

Config attributes

AttributeTypeDefault / options
Amountint 1-205
MirrorboolTrue
SetParentstringnew_locator

Artist help text

Help
Overview:
  Will Create single Wing Module.

How To Use:
  fill the key fields below before build.

Fields:
- SetParent: set the target node name.
- If left as default, the tool uses placeholder behavior for setup.
- Amount: numeric value that controls size/amount/intensity (default 5).
- Mirror: turn this ON/OFF depending on whether you want that feature.
- Template parent examples: Spine_End_Jnt, Head_Jnt, L_Wrist_Jnt.

Tips:
- if a field says left/right or mirror, use it to generate the opposite side quickly.
WingsCreate Wings System RdM Wings01_Wings

Create Wings System RdM Wings

Default block name Wings · icon Wing.png · exec_wings_v001.py

commands
exec_wings_v001.create_wings_block()
exec_wings_v001.build_wings_block()

Config attributes

AttributeTypeDefault / options
SetParentstringnew_locator

Artist help text

Help
Overview:
  Create Wings System RdM Wings.

How To Use:
  fill the key fields below before build.

Fields:
- SetParent: set the target node name.
- If left as default, the tool uses placeholder behavior for setup.
- Template parent examples: Spine_End_Jnt, Head_Jnt, L_Wrist_Jnt.

Tips:
- start with defaults, build once, then tweak only the fields you need.
AntLegThis will create a AntLeg System02_AntLeg

This will create a AntLeg System

Default block name L_Front_AntLeg · icon AntLeg.png · exec_antleg_v001.py

commands
exec_antleg_v001.create_antleg_block()
exec_antleg_v001.build_antleg_block()

Config attributes

AttributeTypeDefault / options
MirrorenumTrue · False · Right_Only
SetParentstringnew_locator

Artist help text

Help
Overview:
  This will create a AntLeg System.

How To Use:
  fill the key fields below before build.

Fields:
- SetParent: set the target node name.
- If left as default, the tool uses placeholder behavior for setup.
- Mirror: choose one option (for example: True, False, Right_Only).
- Template parent examples: L_FrontDoor_Ctrl, Spine_End_Jnt, Head_Jnt.

Tips:
- start with defaults, build once, then tweak only the fields you need.
TailCreate IK/FK Tail System02_Tail

Create IK/FK Tail System

Default block name Tail · icon Tail.png · exec_tail_v001.py

commands
exec_tail_v001.create_tail_block()
exec_tail_v001.build_tail_block()

Config attributes

AttributeTypeDefault / options
FkCtrlsint 1-205
Jointsint 1-2010
SetParentstringnew_locator

Artist help text

Help
Overview:
  Create IK/FK Tail System.

How To Use:
  fill the key fields below before build.

Fields:
- SetParent: set the target node name.
- If left as default, the tool uses placeholder behavior for setup.
- FkCtrls: numeric value that controls size/amount/intensity (default 5).
- Joints: numeric value that controls size/amount/intensity (default 10).
- Template parent examples: Spine_End_Jnt, Head_Jnt, L_Wrist_Jnt.

Tips:
- start with defaults, build once, then tweak only the fields you need.
QuadLimbCreate a Quadruped Leg03_QuadLimb

Create a Quadruped Leg

Default block name L_Hip,L_Knee,L_Ankle,L_Ball · icon Quad_Limb.png · exec_quadlimb_v001.py

commands
exec_quadlimb_v001.create_quadlimb_block()
exec_quadlimb_v001.build_quadlimb_block()

Config attributes

AttributeTypeDefault / options
AutoOrientboolTrue
CreateRibbonsboolTrue
CtrlSizeint 1-204
DogModeenumBack · Front
ForcePoleVectorDistanceenumOff · Leg_Distance · Half_Leg_Distance · Third_Leg_Distance · Double_Leg_Distance · Positive_1_5
IkOrientenumWorld · FootY
MirrorenumTrue · False · Right_Only
SetParentstringnew_locator
TwistAmountint 1-204

Artist help text

Help
Overview:
  Create a Quadruped Leg.

How To Use:
  fill the key fields below before build.

Fields:
- SetParent: set the target node name.
- If left as default, the tool uses placeholder behavior for setup.
- Mirror: choose one option (for example: True, False, Right_Only).
- DogMode: choose one option (for example: Back, Front).
- ForcePoleVectorDistance: choose one option (Off, Leg_Distance, Half_Leg_Distance, Third_Leg_Distance, Double_Leg_Distance, Positive_1_5). Off = default pole vector distance; Leg/Half/Third/Double force the pole vector locator to a distance based on the leg's own length, direction auto-flipped by DogMode (Front = Z+, Back = Z-) to keep the IK pole vector stable; Positive_1_5 forces a fixed Z+1.5 regardless of DogMode.
- CtrlSize: numeric value that controls size/amount/intensity (default 4).
- TwistAmount: numeric value that controls size/amount/intensity (default 4).
- CreateRibbons: turn this ON/OFF depending on whether you want that feature.
- Template parent examples: L_Hand_Ankle_Jnt, L_Foot_Ankle_Jnt, L_FrAnkle_Jnt.

Tips:
- if a field says left/right or mirror, use it to generate the opposite side quickly.
SnakeWill create a Snake System04_Snake

Will create a Snake System

Default block name Snake · icon Snake.png · exec_snake_v001.py

commands
exec_snake_v001.create_snake_block()
exec_snake_v001.build_snake_block()

Config attributes

AttributeTypeDefault / options
SetParentstringnew_locator

Artist help text

Help
Overview:
  Will create a Snake System.

How To Use:
  fill the key fields below before build.

Fields:
- SetParent: set the target node name.
- If left as default, the tool uses placeholder behavior for setup.
- Template parent examples: Spine_End_Jnt, Head_Jnt, L_Wrist_Jnt.

Tips:
- start with defaults, build once, then tweak only the fields you need.
QuadSpineThis will create a QuadSpine System05_QuadSpine

This will create a QuadSpine System

Default block name QuadSpine · icon QuadSpine.png · exec_quadspine_v001.py

commands
exec_quadspine_v001.create_quadspine_block()
exec_quadspine_v001.build_quadspine_block()

Config attributes

AttributeTypeDefault / options
CtrlSizeint 1-204
SetParentstringnew_locator

Artist help text

Help
Overview:
  This will create a QuadSpine System.

How To Use:
  fill the key fields below before build.

Fields:
- SetParent: set the target node name.
- If left as default, the tool uses placeholder behavior for setup.
- CtrlSize: numeric value that controls size/amount/intensity (default 4).
- Template parent examples: Spine_End_Jnt, Head_Jnt, L_Wrist_Jnt.

Tips:
- start with defaults, build once, then tweak only the fields you need.
AnimalMouthAnimal Lips System06_AnimalMouth

Animal Lips System

Default block name Lips · icon AnimalMouth.png · exec_animalmouth_v001.py

commands
exec_animalmouth_v001.create_animalmouth_block()
exec_animalmouth_v001.build_animalmouth_block()

Config attributes

AttributeTypeDefault / options
SetGeostringempty
SetParentstringnew_locator

Artist help text

Help
Overview:
  Animal Lips System.

How To Use:
  fill the key fields below before build.

Fields:
- SetParent: set the target node name.
- If left as default, the tool uses placeholder behavior for setup.
- SetGeo: set the node/object name this block should use.
- Template parent examples: Spine_End_Jnt, Head_Jnt, L_Wrist_Jnt.

Tips:
- start with defaults, build once, then tweak only the fields you need.

Clothes 005_Clothes#

Secondary cloth and accessory rigs.

CapCreate a Cap System01_Cap

Create a Cap System

Default block name Cap · icon Cap.png · exec_cap_v001.py

commands
exec_cap_v001.create_cap_block()
exec_cap_v001.build_cap_block()

Config attributes

AttributeTypeDefault / options
SetParentstringnew_locator

Artist help text

Help
Overview:
  Create a Cap System.

How To Use:
  fill the key fields below before build.

Fields:
- SetParent: set the target node name.
- If left as default, the tool uses placeholder behavior for setup.
- Template parent examples: Spine_End_Jnt, Head_Jnt, L_Wrist_Jnt.

Tips:
- start with defaults, build once, then tweak only the fields you need.
PinCreate a Pin System03_Pin

Create a Pin System

Default block name Pin · icon Pin.png · exec_pin_v001.py

commands
exec_pin_v001.create_pin_block()
exec_pin_v001.build_pin_block()

Config attributes

AttributeTypeDefault / options
SetParentstringnew_locator

Artist help text

Help
Overview:
  Create a Pin System.

How To Use:
  fill the key fields below before build.

Fields:
- SetParent: set the target node name.
- If left as default, the tool uses placeholder behavior for setup.
- Template parent examples: Spine_End_Jnt, Spine_Inv_Jnt, Spine_F_Jnt.

Tips:
- start with defaults, build once, then tweak only the fields you need.
SkirtCreate a Skirt System04_Skirt

Create a Skirt System

Default block name Skirt · icon Skirt.png · exec_skirt_v001.py

commands
exec_skirt_v001.create_skirt_block()
exec_skirt_v001.build_skirt_block()

Config attributes

AttributeTypeDefault / options
SetParentstringnew_locator

Artist help text

Help
Overview:
  Create a Skirt System.

How To Use:
  fill the key fields below before build.

Fields:
- SetParent: set the target node name.
- If left as default, the tool uses placeholder behavior for setup.
- Template parent examples: Spine_End_Jnt, Head_Jnt, L_Wrist_Jnt.

Tips:
- start with defaults, build once, then tweak only the fields you need.
TieCreate a Tie System05_Tie

Create a Tie System

Default block name Tie · icon Tie.png · exec_tie_v001.py

commands
exec_tie_v001.create_tie_block()
exec_tie_v001.build_tie_block()

Config attributes

AttributeTypeDefault / options
SetParentstringnew_locator

Artist help text

Help
Overview:
  Create a Tie System.

How To Use:
  fill the key fields below before build.

Fields:
- SetParent: set the target node name.
- If left as default, the tool uses placeholder behavior for setup.
- Template parent examples: Spine_End_Jnt, Head_Jnt, L_Wrist_Jnt.

Tips:
- start with defaults, build once, then tweak only the fields you need.
ShirtCreate a Shirt System06_Shirt

Create a Shirt System

Default block name Shirt · icon Shirt.png · exec_shirt_v001.py

commands
exec_shirt_v001.create_shirt_block()
exec_shirt_v001.build_shirt_block()

Config attributes

AttributeTypeDefault / options
SetGeostringnew_cube
SetParentstringnew_locator
WireDropoffint 1-2010

Artist help text

Help
Overview:
  Create a Shirt System.

How To Use:
  fill the key fields below before build.

Fields:
- SetParent: set the target node name.
- If left as default, the tool uses placeholder behavior for setup.
- SetGeo: set the target node name.
- If left as default, the tool uses placeholder behavior for setup.
- WireDropoff: numeric value that controls size/amount/intensity (default 10).
- Template parent examples: Spine_End_Jnt, Head_Jnt, L_Wrist_Jnt.

Tips:
- start with defaults, build once, then tweak only the fields you need.
CapeWill create a Cape System07_Cape

Will create a Cape System

Default block name Cape · icon Cape.png · exec_cape_v001.py

commands
exec_cape_v001.create_cape_block()
exec_cape_v001.build_cape_block()

Config attributes

AttributeTypeDefault / options
SetParentstringnew_locator

Artist help text

Help
Overview:
  Will create a Cape System.

How To Use:
  fill the key fields below before build.

Fields:
- SetParent: set the target node name.
- If left as default, the tool uses placeholder behavior for setup.
- Template parent examples: Spine_End_Jnt, Head_Jnt, L_Wrist_Jnt.

Tips:
- start with defaults, build once, then tweak only the fields you need.

Vehicles 006_Vehicles#

Cars and machinery - wheels, doors, steering, drift.

SideMirrorThis will create side mirror controllers01_SideMirror

This will create side mirror controllers

Default block name L_SideMirror · icon SideMirror.png · exec_side_mirror_v001.py

commands
exec_side_mirror_v001.create_side_mirror_block()
exec_side_mirror_v001.build_side_mirror_block()

Config attributes

AttributeTypeDefault / options
CtrlSizeint 1-204
CtrlTypeenumcircleX · bounding_cube
MirrorenumTrue · False · Right_Only
SetParentstringnew_locator

Artist help text

Help
Overview:
  This will create side mirror controllers.

How To Use:
  fill the key fields below before build.

Fields:
- SetParent: set the target node name.
- If left as default, the tool uses placeholder behavior for setup.
- Mirror: choose one option (for example: True, False, Right_Only).
- CtrlSize: numeric value that controls size/amount/intensity (default 4).
- CtrlType: choose one option (for example: circleX, bounding_cube).
- Template parent examples: Spine_End_Jnt, Head_Jnt, L_Wrist_Jnt.

Tips:
- start with defaults, build once, then tweak only the fields you need.
SteeringWheelThis will create a steering wheel controller02_SteeringWheel

This will create a steering wheel controller

Default block name C_SteeringWheel · icon SteeringWheel.png · exec_steering_wheel_v001.py

commands
exec_steering_wheel_v001.create_steering_wheel_block()
exec_steering_wheel_v001.build_steering_wheel_block()

Config attributes

AttributeTypeDefault / options
CtrlColorenumlightBlue · blue · white · purple · green · red · yellow · grey
CtrlSizeint 1-204
CtrlTypeenumcircleX · bounding_cube
SetParentstringnew_locator

Artist help text

Help
Overview:
  This will create a steering wheel controller.

How To Use:
  fill the key fields below before build.

Fields:
- SetParent: set the target node name.
- If left as default, the tool uses placeholder behavior for setup.
- CtrlSize: numeric value that controls size/amount/intensity (default 4).
- CtrlType: choose one option (for example: circleX, bounding_cube).
- CtrlColor: choose one option (for example: lightBlue, blue, white, purple).
- Template parent examples: Spine_End_Jnt, Head_Jnt, L_Wrist_Jnt.

Tips:
- start with defaults, build once, then tweak only the fields you need.
WheelWheel Block03_Wheel

Wheel Block

Default block name Wheel · icon Wheel.png · exec_wheel_v001.py

commands
exec_wheel_v001.create_wheel_block()
exec_wheel_v001.build_wheel_block()

Config attributes

AttributeTypeDefault / options
MirrorenumTrue · False
SetManualRotationAttPosstringempty
SetParentstringnew_locator

Artist help text

Help
Overview:
  Wheel Block.

How To Use:
  fill the key fields below before build.

Fields:
- SetParent: set the target node name.
- If left as default, the tool uses placeholder behavior for setup.
- Mirror: choose one option (for example: True, False).
- SetManualRotationAttPos: set the node/object name this block should use.
- Template parent examples: Spine_End_Jnt, Head_Jnt, L_Wrist_Jnt.

Tips:
- start with defaults, build once, then tweak only the fields you need.
ChasisChasis Block04_Chasis

Chasis Block

Default block name Chasis · icon Chasis.png · exec_chasis_v001.py

commands
exec_chasis_v001.create_chasis_block()
exec_chasis_v001.build_chasis_block()

Config attributes

AttributeTypeDefault / options
SetParentstringnew_locator

Artist help text

Help
Overview:
  Chasis Block.

How To Use:
  fill the key fields below before build.

Fields:
- SetParent: set the target node name.
- If left as default, the tool uses placeholder behavior for setup.
- Template parent examples: Chasis_Center_Suspension_Ctrl, Chasis_Center_Ctrl, Spine_End_Jnt.

Tips:
- start with defaults, build once, then tweak only the fields you need.
SeatSeat Block05_Seat

Seat Block

Default block name Seat · icon Seat.png · exec_seat_v001.py

commands
exec_seat_v001.create_seat_block()
exec_seat_v001.build_seat_block()

Config attributes

AttributeTypeDefault / options
MirrorenumTrue · False
SetParentstringnew_locator

Artist help text

Help
Overview:
  Seat Block.

How To Use:
  fill the key fields below before build.

Fields:
- SetParent: set the target node name.
- If left as default, the tool uses placeholder behavior for setup.
- Mirror: choose one option (for example: True, False).
- Template parent examples: Spine_End_Jnt, Head_Jnt, L_Wrist_Jnt.

Tips:
- start with defaults, build once, then tweak only the fields you need.
TrunkTrunk Block06_Trunk

Trunk Block

Default block name Trunk · icon Trunk.png · exec_trunk_v001.py

commands
exec_trunk_v001.create_trunk_block()
exec_trunk_v001.build_trunk_block()

Config attributes

AttributeTypeDefault / options
SetParentstringnew_locator

Artist help text

Help
Overview:
  Trunk Block.

How To Use:
  fill the key fields below before build.

Fields:
- SetParent: set the target node name.
- If left as default, the tool uses placeholder behavior for setup.
- Template parent examples: Spine_End_Jnt, Head_Jnt, L_Wrist_Jnt.

Tips:
- start with defaults, build once, then tweak only the fields you need.
DriftDrift Block08_Drift

Drift Block

Default block name Drift · icon Drift.png · exec_drift_v001.py

commands
exec_drift_v001.create_drift_block()
exec_drift_v001.build_drift_block()

Config attributes

AttributeTypeDefault / options
SetBackDriftstringempty
SetFrontDriftstringempty
SetParentstringnew_locator

Artist help text

Help
Overview:
  Drift Block.

How To Use:
  fill the key fields below before build.

Fields:
- SetParent: set the target node name.
- If left as default, the tool uses placeholder behavior for setup.
- SetFrontDrift: set the node/object name this block should use.
- SetBackDrift: set the node/object name this block should use.
- Template parent examples: Spine_End_Jnt, Head_Jnt, L_Wrist_Jnt.

Tips:
- start with defaults, build once, then tweak only the fields you need.
WindowWindow Block09_Window

Window Block

Default block name Window · icon Window.png · exec_window_v001.py

commands
exec_window_v001.create_window_block()
exec_window_v001.build_window_block()

Config attributes

AttributeTypeDefault / options
MirrorenumTrue · False
SetParentstringnew_locator

Artist help text

Help
Overview:
  Window Block.

How To Use:
  fill the key fields below before build.

Fields:
- SetParent: set the target node name.
- If left as default, the tool uses placeholder behavior for setup.
- Mirror: choose one option (for example: True, False).
- Template parent examples: Spine_End_Jnt, Head_Jnt, L_Wrist_Jnt.

Tips:
- start with defaults, build once, then tweak only the fields you need.
AutoWheelAutoWheel Block10_AutoWheel

AutoWheel Block

Default block name AutoWheel · icon AutoWheel.png · exec_autowheel_v001.py

commands
exec_autowheel_v001.create_autowheel_block()
exec_autowheel_v001.build_autowheel_block()

Config attributes

AttributeTypeDefault / options
SetMoverCtrlsstringempty
SetWheelsNamestringempty

Artist help text

Help
Overview:
  AutoWheel Block.

How To Use:
  fill the key fields below before build.

Fields:
- SetMoverCtrls: set the node/object name this block should use.
- SetWheelsName: set the node/object name this block should use.

Tips:
- start with defaults, build once, then tweak only the fields you need.
DoorDoor Block11_Door

Door Block

Default block name Door · icon Door.png · exec_door_v001.py

commands
exec_door_v001.create_door_block()
exec_door_v001.build_door_block()

Config attributes

AttributeTypeDefault / options
MirrorenumTrue · False
SetParentstringnew_locator

Artist help text

Help
Overview:
  Door Block.

How To Use:
  fill the key fields below before build.

Fields:
- SetParent: set the target node name.
- If left as default, the tool uses placeholder behavior for setup.
- Mirror: choose one option (for example: True, False).
- Template parent examples: L_FrontDoor_Ctrl, Spine_End_Jnt, Head_Jnt.

Tips:
- start with defaults, build once, then tweak only the fields you need.
PushPush Block13_Push

Push Block

Default block name Push · icon Push.png · exec_push_v001.py

commands
exec_push_v001.create_push_block()
exec_push_v001.build_push_block()

Config attributes

AttributeTypeDefault / options
SetParentstringnew_locator
SetWheelGeostringempty

Artist help text

Help
Overview:
  Push Block.

How To Use:
  fill the key fields below before build.

Fields:
- SetParent: set the target node name.
- If left as default, the tool uses placeholder behavior for setup.
- SetWheelGeo: set the node/object name this block should use.
- Template parent examples: Spine_End_Jnt, Head_Jnt, L_Wrist_Jnt.

Tips:
- start with defaults, build once, then tweak only the fields you need.

Games 007_Games#

Game-engine oriented blocks and body conversion.

RootCreate root joint at 0,0,0001_Root

Create root joint at 0,0,0

Default block name Root · icon Root.png · exec_root_v001.py

commands
exec_root_v001.create_root_block()
exec_root_v001.build_root_block()

Config attributes

AttributeTypeDefault / options
SetParentstringBind_Joints_Grp
ConvertBodyWill convert Mutant Body Template to Games002_ConvertBody

Will convert Mutant Body Template to Games

Default block name ConvertBody · icon BodyGames.png · exec_convertbody_v001.py

commands
exec_convertbody_v001.create_convertbody_block()
exec_convertbody_v001.build_convertbody_block()

Config attributes

AttributeTypeDefault / options
Engineenumunity · unreal
scaleenumNone · Direct · Constraints

Artist help text

Help
Overview:
  Will convert Mutant Body Template to Games.

How To Use:
  fill the key fields below before build.

Fields:
- Engine: choose one option (for example: unity, unreal).
- scale: choose one option (for example: None, Direct, Constraints).

Tips:
- start with defaults, build once, then tweak only the fields you need.
SlidePushCorrectivesBlock dedicated to create Slide Push Correctives System 01_SlidePushCorrectives

Block dedicated to create Slide Push Correctives System

Default block name SlidePushCorrectives · icon PushCorrectives.png · exec_slidepushcorrectives_v001.py

commands
exec_slidepushcorrectives_v001.create_slidepushcorrectives_block()
exec_slidepushcorrectives_v001.build_slidepushcorrectives_block()

Config attributes

AttributeTypeDefault / options
Directionstringfront,back,inner,outer
SetParentstringSpine_Base_Bnd

Artist help text

Help
Overview:
  Block dedicated to create Slide Push Correctives System.

How To Use:
  fill the key fields below before build.

Fields:
- SetParent: set the node/object name this block should use.
- Direction: enter names separated by commas (example format: nameA,nameB,nameC).
- Template parent examples: L_ArmSlideSlideDriver_Loc, L_LegSlideSlideDriver_Loc, Spine_End_Jnt.

Tips:
- start with defaults, build once, then tweak only the fields you need.

Props 008_Props#

General purpose building blocks. The ones to read first when writing your own.

RivetWill Create a Rivet on Selecter Faces01_Rivet

Will Create a Rivet on Selecter Faces

Default block name Rivet · icon Rivet.png · exec_rivet_v001.py

commands
exec_rivet_v001.create_rivet_block()
exec_rivet_v001.build_rivet_block()

Config attributes

AttributeTypeDefault / options
SetFacesstringempty

Artist help text

Help
Overview:
  Will Create a Rivet on Selecter Faces.

How To Use:
  fill the key fields below before build.

Fields:
- SetFaces: set the node/object name this block should use.

Tips:
- start with defaults, build once, then tweak only the fields you need.
Single FKThis will create a Single FK Ctrl + Joint, Like for COG or Single Needs01_Single_FK

This will create a Single FK Ctrl + Joint, Like for COG or Single Needs

Default block name Single_FK · icon Bone.png · exec_single_fk_v001.py

commands
exec_single_fk_v001.create_single_fk_block()
exec_single_fk_v001.build_single_fk_block()

Config attributes

AttributeTypeDefault / options
CreateJointboolTrue
CtrlColorenumlightBlue · blue · white · purple · green · red · yellow · grey
CtrlOrientOffsetboolFalse
CtrlSizeint 1-204
CtrlTypeenumsphere · cube · square · octagon · hexagon · pringle · feet · hand …
GimbalboolTrue
MirrorenumFalse · True · Right_Only
SetCtrlParentHierarchystringCtrl_Grp
SetJointParentHierarchystringMiscellaneous_Grp
ShowOrientAttrsboolTrue

Artist help text

Help
Overview:
  This will create a Single FK Ctrl + Joint, Like for COG or Single Needs.

How To Use:
  fill the key fields below before build.

Fields:
- CtrlType: choose one option (for example: sphere, cube, square, octagon).
- CtrlSize: numeric value that controls size/amount/intensity (default 4).
- CtrlColor: choose one option (for example: lightBlue, blue, white, purple).
- Mirror: False builds as-is. True builds both L_ and R_ sides (auto-prefixes L_ if needed). Right_Only mirrors to the right side only.
- Gimbal: turn this ON/OFF depending on whether you want that feature.
- CtrlOrientOffset: adds an offset transform above the control so you can dynamically change the control orientation without affecting the zero pose.
- ShowOrientAttrs: when ON, the orient proxy attrs (orientTranslate/Rotate/Scale) are visible on the ctrl channel box. Turn OFF to hide them for delivery.
- CreateJoint: turn this ON/OFF depending on whether you want that feature.
- SetCtrlParent_Hierarchy: set the node/object name this block should use.

Tips:
- if a field says left/right or mirror, use it to generate the opposite side quickly.
SlideSlide System in Nurbs02_Slide

Slide System in Nurbs

Default block name Slide · icon Slide.png · exec_slide_v001.py

commands
exec_slide_v001.create_slide_block()
exec_slide_v001.build_slide_block()

Config attributes

AttributeTypeDefault / options
AxisModeenumBlend · Constraint
CtrlColorenumlightBlue · blue · white · purple · green · red · yellow · grey
CtrlSizeint 1-204
MirrorenumFalse · True · Right_Only
SetParentstringnew_locator
SetSlideNurbstringnew_plane

Artist help text

Help
Overview:
  Slide System in Nurbs.

How To Use:
  fill the key fields below before build.

Fields:
- SetParent: set the target node name.
- If left as default, the tool uses placeholder behavior for setup.
- Mirror: True builds both L_ and R_ sides (auto-prefixes L_ if needed). Right_Only builds only the R_ side mirrored from the guide. False builds as-is.
- CtrlSize: numeric value that controls size/amount/intensity (default 4).
- CtrlColor: choose one option (for example: lightBlue, blue, white, purple).
- SetSlideNurb: set the target node name.
- If left as default, the tool uses placeholder behavior for setup.
- Template parent examples: L_ArmSlideSlideDriver_Loc, L_LegSlideSlideDriver_Loc, Spine_End_Jnt.

Tips:
- if a field says left/right or mirror, use it to generate the opposite side quickly.
- When Mirror is True, R_ side SetParent and SetSlideNurb are auto-derived by replacing L_ with R_.
LocalsCreate Local Duplicates for Main Geo and Atach via BlendShape03_Locals

Create Local Duplicates for Main Geo and Atach via BlendShape

Default block name Locals · icon Locals.png · exec_locals_v001.py

commands
exec_locals_v001.create_locals_block()
exec_locals_v001.build_locals_block()

Config attributes

AttributeTypeDefault / options
NewNamesstringLocalA,LocalB,LocalC
SetExtraGeosstringempty
SetGeostringempty

Artist help text

Help
Overview:
  Create Local Duplicates for Main Geo and Atach via BlendShape.

How To Use:
  fill the key fields below before build.

Fields:
- SetGeo: set the node/object name this block should use.
- SetExtraGeos: set the node/object name this block should use.
- NewNames: enter names separated by commas (example format: nameA,nameB,nameC).

Tips:
- start with defaults, build once, then tweak only the fields you need.
BlendshapeThis will create blendshapes for the selected geo04_Blendshape

This will create blendshapes for the selected geo

Default block name BlendShape · icon Blendshape.png · exec_blendshape_v001.py

commands
exec_blendshape_v001.create_blendshape_block()
exec_blendshape_v001.build_blendshape_block()

Config attributes

AttributeTypeDefault / options
NewNamesstringShapeA,ShapeB,ShapeC
SetGeostringempty

Artist help text

Help
Overview:
  This will create blendshapes for the selected geo.

How To Use:
  fill the key fields below before build.

Fields:
- SetGeo: set the node/object name this block should use.
- NewNames: enter names separated by commas (example format: nameA,nameB,nameC).

Tips:
- start with defaults, build once, then tweak only the fields you need.
LatticeLattice Local Rig05_Lattice

Lattice Local Rig

Default block name Lattice · icon Lattice.png · exec_lattice_v001.py

commands
exec_lattice_v001.create_lattice_block()
exec_lattice_v001.build_lattice_block()

Config attributes

AttributeTypeDefault / options
CtrlColorenumpurple · lightBlue · blue · white · green · red · yellow · grey
CtrlSizeint 1-204
Divisionsint 1-203
LocalboolFalse
SetAttrsPositionstringnew_locator
SetGeostringnew_cube
SetParentstringnew_locator

Artist help text

Help
Overview:
  Lattice Local Rig.

How To Use:
  fill the key fields below before build.

Fields:
- SetGeo: set the target node name.
- If left as default, the tool uses placeholder behavior for setup.
- SetParent: set the target node name.
- If left as default, the tool uses placeholder behavior for setup.
- SetAttrsPosition: set the target node name.
- If left as default, the tool uses placeholder behavior for setup.
- Local: turn this ON/OFF depending on whether you want that feature.
- CtrlSize: numeric value that controls size/amount/intensity (default 4).
- CtrlColor: choose one option (for example: purple, lightBlue, blue, white).
- Template parent examples: Spine_End_Jnt, Head_Jnt, L_Wrist_Jnt.
- Template attrs-position examples: Vis_Ctrl, L_Eyelids_Scale_Ctrl, L_Brow_Ctrl.

Tips:
- if a field says left/right or mirror, use it to generate the opposite side quickly.
SquashCreate a Local Squash System06_Squash

Create a Local Squash System

Default block name Squash · icon Squash.png · exec_squash_v001.py

commands
exec_squash_v001.create_squash_block()
exec_squash_v001.build_squash_block()

Config attributes

AttributeTypeDefault / options
BendFrontCurvaturestring0.0
BendFrontHighBoundstring2.0
BendFrontLowBoundstring0.0
BendFrontMultstring1.0
BendSideCurvaturestring0.0
BendSideHighBoundstring2.0
BendSideLowBoundstring0.0
BendSideMultstring1.0
BendboolTrue
LockSecondaryAttrsboolTrue
SetGeostringempty
SetParentstringnew_locator
SquashFactorstring0.0
SquashHighBoundstring2.0
SquashLowBoundstring0.0
SquashMultstring0.01
SquashboolTrue
UseCustomPivotsboolFalse

Artist help text

Help
Overview:
  Create a Local Squash System.

How To Use:
  fill the key fields below before build.

Fields:
- Squash: Enable or disable creation of the squash deformer.
- Bend: Enable or disable creation of the bend deformers.
- UseCustomPivots: Show guides to independently position the deformers.
- SetParent: set the target node name.
- If left as default, the tool uses placeholder behavior for setup.
- SetGeo: set the node/object name this block should use.
- Template parent examples: Spine_End_Jnt, Head_Jnt, L_Wrist_Jnt.

Tips:
- start with defaults, build once, then tweak only the fields you need.
RibbonizerCreates a ribbon, Copyright (C) 2018 Orkhan Ashrafov 07_Ribbonizer

Creates a ribbon, Copyright (C) 2018 Orkhan Ashrafov

Default block name Ribbon · icon Ribbon.png · exec_ribbonizer_v001.py

commands
exec_ribbonizer_v001.create_ribbonizer_block()
exec_ribbonizer_v001.build_ribbonizer_block()

Config attributes

AttributeTypeDefault / options
AddFkboolTrue
ConstraintboolTrue
CtrlOrientationenumSurfaceNormal · WorldForward
CtrlScalesboolFalse
Ctrlsint 1-205
EqualboolTrue
FkOnLastboolFalse
GimbalboolFalse
JointOrientboolFalse
Jointsint 1-205
MiddleCtrlPositionenumOriginal · Start · End
MirrorenumFalse · True · Right_Only
SetParentstringnew_locator
WireboolFalse

Artist help text

Help
Overview:
  Creates a ribbon, Copyright (C) 2018 Orkhan Ashrafov.

How To Use:
  fill the key fields below before build.

Fields:
- SetParent: set the target node name.
- If left as default, the tool uses placeholder behavior for setup.
- Mirror: True builds both L_ and R_ sides (auto-prefixes L_ if needed). Right_Only mirrors to the right side only. False builds as-is.
- Equal: evenly spaces controls and joints along the ribbon. When OFF, spacing follows the surface parameterization.
- Ctrls: number of IK controls along the ribbon (default 5).
- Joints: number of bind joints along the ribbon (default 5).
- Constraint: ON uses parentConstraint/scaleConstraint to link IK controls to their joints (supports offsets, more flexible). OFF uses direct attribute connections (lighter, no constraint overhead).
- AddFk: adds an FK control chain on top of the IK controls for layered animation.
- FkOnLast: when ON (and AddFk is ON), adds an FK control on the final IK control as well. Default is OFF, which skips the last control.
- Wire: uses a wire deformer instead of a skinCluster to drive the ribbon surface. Needs at least 2 controls.
- CtrlScales: when ON, unlocks scale attributes on the IK controls and connects them to the bind joints.
- JointOrient: when ON, bind joints orient to the nearest control joint instead of the follicle surface normal.
- MiddleCtrlPosition: where the main control is placed. Original uses the surface bounding box center. Start/End places it at the first/last bind joint.
- CtrlOrientation: SurfaceNormal keeps the default follicle orientation (Z follows surface normal). WorldForward orients controls and joints so Z faces world-forward and Y faces world-up.
- Gimbal: adds a nested gimbal control under the Ribbon Main Control for clean rotations.
- Template parent examples: Spine_End_Jnt, Head_Jnt, L_Wrist_Jnt.

Tips:
- if a field says left/right or mirror, use it to generate the opposite side quickly.
ChainCreate a FK Chain08_Chain

Create a FK Chain

Default block name Chain · icon Chain.png · exec_chain_v001.py

commands
exec_chain_v001.create_chain_block()
exec_chain_v001.build_chain_block()

Config attributes

AttributeTypeDefault / options
AutoRotateboolFalse
CtrlColorenumlightBlue · blue · white · purple · green · red · yellow · grey
CtrlSizeint 1-201
CtrlTypeenumsquare · sphere · cube · octagon · hexagon · pringle · feet · hand …
IndependentScaleboolFalse
MirrorboolFalse
SegScaleCompensateboolTrue
SetParentstringnew_locator
TwistAxisenumX · Y · Z

Artist help text

Help
Overview:
  Create a FK Chain.

How To Use:
  fill the key fields below before build.

Fields:
- SetParent: set the target node name.
- If left as default, the tool uses placeholder behavior for setup.
- Mirror: turn this ON/OFF depending on whether you want that feature.
- AutoRotate: turn this ON/OFF depending on whether you want that feature.
- SegScaleCompensate: turn this ON/OFF to enable or disable segmentScaleCompensate on all joints (FK + bind). Default is ON.
- CtrlSize: numeric value that controls size/amount/intensity (default 1).
- CtrlColor: choose one option (for example: lightBlue, blue, white, purple).
- CtrlType: choose one option (for example: square, sphere, cube, octagon).
- Template parent examples: Spine_End_Jnt, Head_Jnt, L_Wrist_Jnt.

Tips:
- if a field says left/right or mirror, use it to generate the opposite side quickly.
DinamicScaleAdd Size Attrs and Extra Scale to Base09_DinamicScale

Add Size Attrs and Extra Scale to Base

Default block name DinamicScale · icon ExtraScales.png · exec_dinamic_scale_v001.py

commands
exec_dinamic_scale_v001.create_dinamic_scale_block()
exec_dinamic_scale_v001.build_dinamic_scale_block()

Artist help text

Help
Overview:
  Add Size Attrs and Extra Scale to Base.

How To Use:
  usually you can build directly with defaults, then adjust if needed.
MultiBoneWill create multiple bones with controllers10_MultiBone

Will create multiple bones with controllers

Default block name MultiBone · icon MultiBone.png · exec_multibone_v001.py

commands
exec_multibone_v001.create_multibone_block()
exec_multibone_v001.build_multibone_block()

Config attributes

AttributeTypeDefault / options
CtrlColorenumyellow · lightBlue · blue · white · purple · green · red · grey
CtrlSizeint 1-204
CtrlTypeenumsphere · square · cube · octagon · hexagon · pringle · feet · hand …
SetParentsstringnew_locator_each

Artist help text

Help
Overview:
  Will create multiple bones with controllers.

How To Use:
  fill the key fields below before build.

Fields:
- SetParents: set the target node name.
- If left as default, the tool uses placeholder behavior for setup.
- CtrlSize: numeric value that controls size/amount/intensity (default 4).
- CtrlColor: choose one option (for example: yellow, lightBlue, blue, white).
- CtrlType: choose one option (for example: sphere, square, cube, octagon).
- Template parent examples: Spine_End_Jnt, Head_Jnt, L_Wrist_Jnt.

Tips:
- start with defaults, build once, then tweak only the fields you need.
ReverseFkCreate a Bidirectional FK Chain - Forward and Reverse control simultaneously11_ReverseFk

Create a Bidirectional FK Chain - Forward and Reverse control simultaneously

Default block name ReverseFk · icon ReverseFk.png · exec_reverse_fk_v001.py

commands
exec_reverse_fk_v001.create_reverse_fk_block()
exec_reverse_fk_v001.build_reverse_fk_block()

Config attributes

AttributeTypeDefault / options
CtrlColorenumlightBlue · blue · white · purple · green · red · yellow · grey
CtrlSizeint 1-201
CtrlTypeenumsquare · sphere · cube · octagon · hexagon · pringle · feet · hand …
MirrorboolFalse
SetParentstringnew_locator
TwistAxisenumX · Y · Z

Artist help text

Help
Overview:
  Create a Bidirectional FK Chain with Forward and Reverse controls active simultaneously.

How To Use:
  fill the key fields below before build.

Fields:
- SetParent: set the target node name.
- Mirror: turn this ON/OFF depending on whether you want that feature.
- CtrlSize: numeric value that controls size (default 1).
- CtrlColor: choose one option (lightBlue, blue, white, purple, etc).
- CtrlType: choose one option (square, sphere, cube, octagon, etc).
- TwistAxis: rotation axis for FK controls.

Features:
- Forward FK: Control from root down the chain (full size).
- Reverse FK: Control from tip back up (85% size for distinction).
- FK_Direction slider (0-1): Blend between forward and reverse control influence.
- 0.5 default = equal influence from both systems.
ReverseSplineThis will create a ReverseSpline System12_ReverseSpline

This will create a ReverseSpline System

Default block name ReverseSpline · icon ReverseSpline.png · exec_reverse_spline_v001.py

commands
exec_reverse_spline_v001.create_reverse_spline_block()
exec_reverse_spline_v001.build_reverse_spline_block()

Config attributes

AttributeTypeDefault / options
CtrlSizeint 1-204
SetParentstringnew_locator

Artist help text

Help
Overview:
  This will create a ReverseSpline System.

How To Use:
  fill the key fields below before build.

Fields:
- SetParent: set the target node name.
- If left as default, the tool uses placeholder behavior for setup.
- CtrlSize: numeric value that controls size/amount/intensity (default 4).
- Template parent examples: Spine_End_Jnt, Head_Jnt, L_Wrist_Jnt.

Create Step:
- After creating the block, you will be prompted for the amount of joints.
- This block enforces odd values only (5, 7, 9, 11, ...).
- Maximum supported amount is 25 joints.

Tips:
- start with defaults, build once, then tweak only the fields you need.
RibbonTweakersCreates a smart follicle-based ribbon tweaker layer with controls, rig joints, and bind 13_RibbonTweakers

Creates a smart follicle-based ribbon tweaker layer with controls, rig joints, and bind joints.

Default block name RibbonTweakers · icon RibbonTweakers.png · exec_ribbon_tweakers_v001.py

commands
exec_ribbon_tweakers_v001.create_ribbon_tweakers_block()
exec_ribbon_tweakers_v001.build_ribbon_tweakers_block()

Config attributes

AttributeTypeDefault / options
CtrlColorenumlightBlue · blue · white · purple · green · red · yellow · grey
CtrlSizeint 1-201
CtrlTypeenumcircleY · square · sphere · cube
CustomNamesstringempty
FlipRightboolFalse
Jointsint 1-2016
OrientXToWorldboolFalse
OrientYToWorldboolFalse
OrientZToWorldboolFalse
SetParentstringnew_locator
WalkAxisenumV · U

Artist help text

Help
Overview:
  Builds a simple ribbon tweaker layer.

How To Use:
  1) Create block and set guide sides in popup.
  2) Keep the generated NURBS cylinder guide, or parent another NURBS under the block.
  3) Build.

Fields:
- SetParent: parent target for controls.
- Joints: amount of tweaker chains to create.
- WalkAxis: V or U distribution over the ribbon.
- CtrlType: mt.curve control shape.
- CtrlSize: control size.
- CtrlColor: control color.
- CustomNames: comma-separated names for each tweaker ctrl (e.g. Spine,Chest,Neck). If fewer names than joints, the last name is suffixed with 1,2,3... to fill the rest.
- OrientXToWorld/OrientYToWorld/OrientZToWorld: if True, zeroes that rotate axis on the ctrl root so it stays aligned to world on that axis instead of following the follicle.
CtrlOnSelectionCreates controllers on selected joints/objects with desired shape, color and scale. Work14_CtrlOnSelection

Creates controllers on selected joints/objects with desired shape, color and scale. Works on multiple objects at once. Supports direct connect and constraints.

Default block name CtrlOnSelection · icon CtrlOnSelection.png · exec_ctrl_on_selection_v001.py

commands
exec_ctrl_on_selection_v001.create_ctrl_on_selection_block()
exec_ctrl_on_selection_v001.build_ctrl_on_selection_block()

Config attributes

AttributeTypeDefault / options
Colorenumyellow · red · blue · green · white · purple · lightBlue · pink …
ConnectionenumDirectConnect · ParentConstraint · ScaleConnect · ParentAndScale · None
Scaleint 1-201
SetJointsstringempty
SetParentstringCtrl_Grp
Shapeenumcube · sphere · circle · circleX · circleY · circleZ · square · cubePlus …
StripJointSuffixboolTrue

Artist help text

Help
Overview:
  Creates controllers positioned on selected joints or objects.
  Works on multiple objects at once.

How To Use:
  Select joints in scene, click 'Add Selected' to populate SetJoints.
  Set desired shape, color and scale, then click Build.

Fields:
- SetJoints: Comma-separated list of joints/objects to create controllers on.
- SetParent: Node the ctrl offset group will follow via parentConstraint (mo=True).
  Default is Ctrl_Grp. Leave empty to skip the constraint.
- Shape: Curve shape for the controller.
- Color: Override color for the controller.
- Scale: Size multiplier (1-20).
- Connection: How to connect the ctrl to the joint.
  * DirectConnect: connectAttr ctrl.t/r/s -> joint.t/r/s.
  * ParentConstraint: joint follows ctrl via parentConstraint (mo=True).
  * ScaleConnect: joint scale follows ctrl scale via connectAttr.
  * ParentAndScale: parentConstraint + scale connectAttr.
  * None: no connection, ctrl is just positioned at the joint.
- StripJointSuffix: strips _Jnt suffix before adding _Ctrl.
  Example: L_Arm_Jnt -> L_Arm_Ctrl. If False: L_Arm_Jnt_Ctrl.

Tips:
- DirectConnect is the default and most direct wiring.
- ParentAndScale is preferred when you need mo offset flexibility.

Data 009_Data#

Blocks that reapply saved data - skin weights, control shapes - as part of the build.

Load SkinLoad SKin Cluster Data01_Load_Skin

Load SKin Cluster Data

Default block name Load_Skin · icon Skin.png · exec_load_skin_v001.py

commands
exec_load_skin_v001.create_load_skin_block()
exec_load_skin_v001.build_load_skin_block()

Config attributes

AttributeTypeDefault / options
Pathstringempty

Artist help text

Help
Overview:
  Load SKin Cluster Data.

How To Use:
  fill the key fields below before build.

Fields:
- Path: enter the file/folder path to the data you want to load.

Tips:
- start with defaults, build once, then tweak only the fields you need.
Load CtrlsLoad Ctrls Data from File02_Load_Ctrls

Load Ctrls Data from File

Default block name Load_Ctrls · icon Controller.png · exec_load_ctrls_v001.py

commands
exec_load_ctrls_v001.create_load_ctrls_block()
exec_load_ctrls_v001.build_load_ctrls_block()

Config attributes

AttributeTypeDefault / options
Filestringempty

Artist help text

Help
Overview:
  Load Ctrls Data from File.

How To Use:
  fill the key fields below before build.

Fields:
- File: enter the file/folder path to the data you want to load, or type a preset name (AG, SP, Quad, Simple, Game, Pig, Shot, Neat, Bird).

Tips:
- start with defaults, build once, then tweak only the fields you need.

Other 010_Other#

Utility blocks, including the base rig and the code/stop blocks.

BaseAThis will create a Base to hold the rig (type A)001_BaseA

This will create a Base to hold the rig (type A)

Default block name BaseA · icon BaseA.png · exec_baseA_v001.py

commands
exec_baseA_v001.create_BaseA()
exec_baseA_v001.build_baseA_block()

Config attributes

AttributeTypeDefault / options
CtrlColorenumlightBlue · blue · white · purple · green · red · yellow · grey
CtrlScaleint 1-204
NamestringMutant_Tools
CodeExecute custom code002_Code

Execute custom code

Default block name Code · icon CODE.png · exec_code_v001.py

commands
exec_code_v001.create_code_block()
exec_code_v001.build_code_block()

Config attributes

AttributeTypeDefault / options
Codestringempty
ExecenumPython · Mel
RunAfterBuildboolFalse
RunBeforeBuildboolFalse
StopThis will stop the build when building to this block.003_Stop

This will stop the build when building to this block.

Default block name Stop · icon Stop.png · exec_stop_v001.py

commands
exec_stop_v001.create_stop_block()
exec_stop_v001.build_stop_block()
RenameRename nodes004_Rename

Rename nodes

Default block name Rename · icon Rename.png · exec_rename_v001.py

commands
exec_rename_v001.create_rename_block()
exec_rename_v001.build_rename_block()

Config attributes

AttributeTypeDefault / options
RenameAstringfrom,to
RenameBstringempty
RenameCstringempty
RenameDstringempty
RenameEstringempty
RenameFstringempty
RenameGstringempty
RenameHstringempty
RenameIstringempty
RenameJstringempty
UnselectableMake transforms Unselectable005_Unselectable

Make transforms Unselectable

Default block name Unselectable · icon Unselectable.png · exec_unselectable_v001.py

commands
exec_unselectable_v001.create_unselectable_block()
exec_unselectable_v001.build_unselectable_block()

Config attributes

AttributeTypeDefault / options
LockAttrstringGlobal_Ctrl.Geo
SetGeostringempty
SkinWill skin joints to geos006_Skin

Will skin joints to geos

Default block name Skin · icon Skin.png · exec_skin_v001.py

commands
exec_skin_v001.create_skin_block()
exec_skin_v001.build_skin_block()

Config attributes

AttributeTypeDefault / options
SetGeostringempty
SetJointsstring*_Bnd

Artist help text

Help
Overview:
  Will skin joints to geos.

How To Use:
  fill the key fields below before build.

Fields:
- SetGeo: set the node/object name this block should use.
- SetJoints: node name or pattern.
- You can use * as a wildcard when useful.

Tips:
- start with defaults, build once, then tweak only the fields you need.
Proxy AttrWill duplicate and connect all proxy attrs from desire transform007_Proxy_Attr

Will duplicate and connect all proxy attrs from desire transform

Default block name Proxy_Attr · icon ProxyAttr.png · exec_proxy_attr_v001.py

commands
exec_proxy_attr_v001.create_proxy_attr_block()
exec_proxy_attr_v001.build_proxy_attr_block()

Config attributes

AttributeTypeDefault / options
CtrlShapeenumcross · gear · hexagon · octagon · square · 2dArrow
SetCopyAttrsFromstringempty
SetParentstringnew_locator

Artist help text

Help
Overview:
  Will duplicate and connect all proxy attrs from desire transform.

How To Use:
  fill the key fields below before build.

Fields:
- SetParent: set the target node name.
- If left as default, the tool uses placeholder behavior for setup.
- CtrlShape: choose one option (for example: cross, gear, hexagon, octagon).
- SetCopyAttrsFrom: set the node/object name this block should use.
- Template parent examples: L_Hand_Ankle_Jnt, L_Hand_Palm_Jnt, Spine_End_Jnt.

Tips:
- start with defaults, build once, then tweak only the fields you need.
SetterWIll set attrs008_Setter

WIll set attrs

Default block name Setter · icon Pose.png · exec_setter_v001.py

commands
exec_setter_v001.create_setter_block()
exec_setter_v001.build_setter_block()

Config attributes

AttributeTypeDefault / options
Pose0stringnode,tx,ty,tz,rx,ry,rz,sx,sy,sz
Pose1stringempty
Pose2stringempty
Pose3stringempty
Pose4stringempty
Pose5stringempty
Pose6stringempty
Pose7stringempty
Pose8stringempty

Artist help text

Help
Overview:
  WIll set attrs.

How To Use:
  fill the key fields below before build.

Fields:
- Pose0: enter names separated by commas (example format: nameA,nameB,nameC).
- Pose1: set the node/object name this block should use.
- Pose2: set the node/object name this block should use.
- Pose3: set the node/object name this block should use.
- Pose4: set the node/object name this block should use.
- Pose5: set the node/object name this block should use.

Tips:
- start with defaults, build once, then tweak only the fields you need.
Anim To AttrWill save current pose to an attr via SDK009_Anim_To_Attr

Will save current pose to an attr via SDK

Default block name PoseToAttr · icon AnimToAttr.png · exec_anim_to_attr_v001.py

commands
exec_anim_to_attr_v001.create_animtoattr_block()
exec_anim_to_attr_v001.build_animtoattr_block()

Config attributes

AttributeTypeDefault / options
AnimStepstring0.5
NewAttrNamestringPose
SetNewAttrNodestringnew_locator
SetObjectstringempty

Artist help text

Help
Overview:
  Will save current pose to an attr via SDK.

How To Use:
  fill the key fields below before build.

Fields:
- SetObject: set the node/object name this block should use.
- NewAttrName: set the node/object name this block should use.
- SetNewAttrNode: set the target node name.
- If left as default, the tool uses placeholder behavior for setup.
- AnimStep: set the node/object name this block should use.

Tips:
- start with defaults, build once, then tweak only the fields you need.
Change ColorsChange Colors010_Change_Colors

Change Colors

Default block name ChangeColors · icon ChangeColors.png · exec_change_colors_v001.py

commands
exec_change_colors_v001.create_change_colors_block()
exec_change_colors_v001.build_change_colors_block()

Config attributes

AttributeTypeDefault / options
ChangeColors1stringempty
ChangeColors2stringempty
ChangeColors3stringempty
ChangeColors4stringempty
ChangeColors5stringempty
ChangeColors6stringempty
ChangeColors7stringempty
ChangeColors8stringempty
ChangeColors9stringempty

Artist help text

Help
Overview:
  Change Colors.

How To Use:
  fill the key fields below before build.

Fields:
- ChangeColors1: set the node/object name this block should use.
- ChangeColors2: set the node/object name this block should use.
- ChangeColors3: set the node/object name this block should use.
- ChangeColors4: set the node/object name this block should use.
- ChangeColors5: set the node/object name this block should use.
- ChangeColors6: set the node/object name this block should use.

Tips:
- start with defaults, build once, then tweak only the fields you need.
SpaceSwitchesThis will add space switches to the target ctrl010_SpaceSwitches

This will add space switches to the target ctrl

Default block name SpaceSwitches · icon SpaceSwitch.png · exec_spaceSwitches_v001.py

commands
exec_spaceSwitches_v001.create_spaceSwitches_block()
exec_spaceSwitches_v001.build_spaceSwitches_block()

Config attributes

AttributeTypeDefault / options
AnimbotboolTrue
AttrNamestringFollow
CustomNamesstringempty
MaintainOffsetboolTrue
MirrorboolFalse
RotateboolTrue
RunAfterBuildboolFalse
SetAttrsHolderstringempty
SetTargetCtrlstringempty
SpacesstringMutant_Tools_Grp, Mover_Gimbal_Ctrl
SplitTranslateRotateboolFalse
TranslateboolTrue

Artist help text

Help
Overview:
  This will add space switches to the target ctrl.

How To Use:
  fill the key fields below before build.

Fields:
- SetTargetCtrl: set the node/object name this block should use.
- SetAttrsHolder: set the node/object name this block should use.
- Spaces: enter names separated by commas (example format: nameA,nameB,nameC).
- CustomNames: optional display names for the enum, same count as Spaces (example: World,Global,Body). Leave empty to use defaults.
- Translate: turn this ON/OFF depending on whether you want that feature.
- Animbot: turn this ON/OFF depending on whether you want that feature.
- Rotate: turn this ON/OFF depending on whether you want that feature.
- MaintainOffset: turn this ON/OFF to enable/disable maintain offset on constraints (default: ON).
- AttrName: custom name for the space switch attribute (default: Follow).
- SplitTranslateRotate: when ON, creates separate Translate and Rotate space switch attributes instead of one combined attr.
- RunAfterBuild: Check True to defer execution until after the full build finishes (recommended if target controllers or space references are generated by later blocks).
- Template target ctrl examples: Tail_1_Main_Ctrl, Eyes_Main_Ctrl, Head_Ctrl.

Tips:
- if a field says left/right or mirror, use it to generate the opposite side quickly.
SoftModThis will add a soft mod to a given vertex011_SoftMod

This will add a soft mod to a given vertex

Default block name SoftMod · icon SoftMod.png · exec_softMod_v001.py

commands
exec_softMod_v001.create_softMod_block()
exec_softMod_v001.build_softMod_block()

Config attributes

AttributeTypeDefault / options
MirrorboolFalse
SetControlParentstringCtrl_Grp
SetTargetVertexstringempty

Artist help text

Help
Overview:
  This will add a soft mod to a given vertex.

How To Use:
  fill the key fields below before build.

Fields:
- SetTargetVertex: set the node/object name this block should use.
- Mirror: turn this ON/OFF depending on whether you want that feature.
- SetControlParent: set the node/object name this block should use.
- Template parent examples: Spine_End_Jnt, Head_Jnt, L_Wrist_Jnt.

Tips:
- if a field says left/right or mirror, use it to generate the opposite side quickly.
Label JointsFind all joints in the scene and label them.012_Label_Joints

Find all joints in the scene and label them.

Default block name LabelJoints · icon Label.png · exec_label_joints_v001.py

commands
exec_label_joints_v001.create_label_joints_block()
exec_label_joints_v001.build_label_joints_block()

Artist help text

Help
Overview:
  Labels every joint in the scene using smart side/name parsing.

How To Use:
  Create this block and run Build.

Behavior:
- Processes all joints in scene (selection is ignored).
- Sets joint side as Left/Right/Center.
- Sets type to Other and writes clean label text into otherType.

Naming Support:
- Prefix side: L_*, R_*, Left*, Right*.
- Suffix side: *_l, *_r, *_L, *_R (Unreal style).
- Strips common tail tokens like Bnd, Skl, Jnt, Bind, Guide, JntCtrl.
WIP CompleteSet the rig scene to WIP or Complete mode013_WIP_Complete

Set the rig scene to WIP or Complete mode

Default block name WIP_Complete · icon WIP_Complete.png · exec_wip_complete_v001.py

commands
exec_wip_complete_v001.create_wip_complete_block()
exec_wip_complete_v001.build_wip_complete_block()

Config attributes

AttributeTypeDefault / options
Geometry_Groupstringgeo
ModeenumWIP · COMPLETE

Artist help text

Help
Overview:
  Sets the rig scene to WIP or Complete mode, mirroring the Helpers UI buttons.

How To Use:
  Set Mode to WIP or COMPLETE then build the block.

Fields:
- Mode: WIP keeps the rig editable and visible. COMPLETE finalises the rig hierarchy, locks geo, tags controllers and hides internal groups.
- Geometry Group: The name of the geometry group to lock/unlock/hide/show (defaults to 'geo').

Tips:
- WIP mode is useful during rigging iterations.
- COMPLETE mode prepares the rig for delivery/animation.
SurfaceConstraintCreate surface constraints from vertex skinning data014_SurfaceConstraint

Create surface constraints from vertex skinning data

Default block name SurfaceConstraint · icon SurfaceConstraint.png · exec_surface_constraint_v001.py

commands
exec_surface_constraint_v001.create_surface_constraint_block()
exec_surface_constraint_v001.build_surface_constraint_block()

Config attributes

AttributeTypeDefault / options
MinWeightint 1-200.01
SetControlsstringempty
SetNodeListstringempty

Artist help text

Help
Overview:
  Create surface constraints on controls or groups based on vertex skinning influences.

How To Use:
  1. Select the vertices you want to use in Maya and click 'Add Selected' in the Vertices list to add them in order ONE BY ONE.
  2. Add the target controls/groups to the Controls list in the same order you want them to be constrained.
  3. Each vertex will drive the corresponding control/group in the same position in the lists.
  4. Constraints will be created on offset groups (not directly on the input controls).
  5. Adjust MinWeight to filter influences. Number gets divided by 100 (default 1 = 0.01).

Fields:
- Vertices (SetNodeList): list of vertex components (mesh.vtx[index] format) added in selection order.
- Controls (SetControls): list of control/group names to constrain.
- MinWeight: minimum influence weight threshold to keep.

Tips:
- Use the Add Selected button to append vertices in the order you select them.
- Use the Add Selected button in the Controls list to add controls/groups in the order you want them to match the vertices.
- Ensure all geometry is properly skinned before building.
- Controls/groups must exist in the scene.

Write your own

A block is a folder with a JSON and a Python file. Drop it into Blocks/ and the AutoRigger finds it - no registration step.